Controls - Fishman Isys III User Manual

Isys III Quick Start
1. Set the controls • Set volume off and bass, middle and treble to center.
2. Plug in • Connect the Isys III to an amplifi er or PA with a ¼-inch instrument
cable. The batt light will fl ash once quickly to indicate it has switched on.
3. Tune up • Press the tuner button. When it's on, the tuner mutes the
signal. Press again to exit.
4. Turn up • Raise the volume and adjust the bass and treble controls to your
liking.
2
Isys III Controls
Volume • For the cleanest signal, set the volume knob as high as possible,
without causing distortion or feedback.
Bass • Boost here to add depth and weight to the sound of the guitar.
Middle • Turn the middle knob all the way left for a smooth "scooped out"
tone at high volume levels. Raise the middle knob to the right of center to add
midrange "bite" to the sound.
T reble • Boost to cut through the mix. Cut to mellow and subdue the sound.
T une • Use the tuner lights as shown below to tune your instrument.
"A" note "A" note
below pitch in tune
When the batt lamp lights steadily it is time to change the battery. To conserve
the battery, unplug the instrument and turn off the tuner when not in use.
"A" note "A#" note
above pitch in tune
3