Frequently Asked Questions - Miele G 663 Plus Operating Instructions Manual

With the aid of the following guide, minor problems can be fixed without a service
call.
What if ...
the dishwasher does not
start?
the dishwasher stops
during a program?
the dishwasher stops
running, shortly after
starting a program and
the optic indicator
flashes?
after starting a program,
the optic indicator does
not shine?

Frequently asked questions

Possible fault
The door is not properly
closed.
The machine is not
plugged in.
The fuse is defective or
the breaker has tripped.
The dishwasher is not
turned on.
No program is selected.
The fuse is defective or
the breaker has tripped.
Water intake error.
The "Intake / Drain"
indicator flashes / lights.
The optic indicator
reflector was not placed in
the steam deflector
properly.
Fix
Close the door firmly.
Insert the plug.
Reset the circuit breaker.
Make sure it is a 15 A
circuit breaker.
Press "On", select
program.
Select a program with the
program selection
buttons.
Reset the circuit breaker.
Make sure it is a 15 A
circuit breaker.
– Turn off the dishwasher.
– Open the water valve.
– Clean the water inlet
filter, see maintenance
instructions.
The waterproof system
has activated.
– Call the Miele Technical
Service Department.
Install the optic indicator
reflector correctly.
See Installation manual,
"1. Install the steam
deflector".
37