Miele G 663 Plus Operating Instructions Manual page 40

Frequently asked questions
What if ...
dishes are not dry,
glasses and cutlery are
spotted?
white residue is visible
on cutlery and dishes,
clouding occurs on
glassware and film can
be wiped off?
there are smears on
glasses and cutlery,
bluish sheen on the
surface of glasses and
film can be wiped off?
40
Possible fault
The rinse aid setting may
be too low, or the rinse aid
reservoir is empty.
Dishes were taken out too
soon.
Not enough rinse aid was
used.
The salt reservoir is
empty.
The salt reservoir cap was
not correctly screwed on.
The incorrect detergent
was used.
The rinse aid dosage is
set too high.
Fix
Increase the dosage or
refill the reservoir, see
"Before using for the first
time".
Leave dishes in longer.
Increase the dosage, see
"Before using for the first
time".
Add reactivation salt, see
"Before using for the first
time".
Reseat it making sure it
screws back on correctly.
Only use powder
detergent or tablets.
Reduce the dosage, see
"Before using for the first
time".