Contents Safety instructions Maintenance and cleaning Cleaning the filters Disposal Prolonged periods of non-operation Frost precautions Economical and ecological dishwashing Moving the machine Installation instructions What to do, when... Building-in Service and spare parts Levelling Fixing to adjacent units Hints for test centres Water supply connections Water inlet hose with safety valve Water outlet hose connection...
Safety instructions It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information.
Installation instructions Any electrical and/or plumbing work required to install Water supply connections this appliance should be carried out by a qualified This dishwasher may be fed with either hot (max. 60°) or cold electrician and/or plumber or competent person. water.
Water outlet hose connection Electrical connection The end of the drain hose can be connected in the following Information concerning the electrical connection is given on the ways: rating plate on the edge of the dishwasher’s door. 1. To the sink outlet spigot, securing it to the underside of the Before plugging the appliance into the wall socket, make sure work surface.
Description of the appliance Upper basket stop Water hardness dial Salt container Detergent dispenser Control panel Rating plate Rinse aid dispenser Filters Lower spray arm 10. Upper spray arm 11. Upper basket...
The control panel Delay start button Function buttons Cancel button Digital display On/Off button Programme selection buttons 3 in 1 button Half load button Indicator lights Function buttons: "3 in 1" button in addition to the selection of the : This appliance is equipped with the option washing programme and the "half load", the following functions 3 in 1, that allows the use of the "3 in 1"...
Audible signals Audible signals have been introduced to help indicate which operations the dishwasher is performing: "Setting of the water softener" "End of programme" "Something not working with the machine" Deactivation/activation of the audible signals (The dishwasher must be switched off) Factory setting: audible signals activated 1.
Prior to using for the first time Before using your dishwasher for the first time: b) Setting electronically (The dishwasher must be switched off) 1. Ensure that the electrical and water connections comply The dishwasher is factory set at level 5. with the installation instructions.
Filling with dishwasher salt Only use salt specifically designed for use in dishwashers. All other types of salt not specifically designed for use in a dishwasher, especially table salt, will damage the water softener. Only fill with salt just before starting one of the complete washing programmes.
Rinse aid If you are using dishwasher detergent that already contains rinse aid, the detergent including the rinse aid must be Rinse aid is automatically added during the last rinse, ensuring placed in the detergent compartment. thorough rinsing, and spot and streak free drying. In this case the rinse aid dispenser must be deactivated, in The dispenser, which is positioned inside the door, holds about order to avoid a double dosage.
In daily use Check if it’s necessary to refill with dishwasher salt or rinse Loading cutlery and dishes Sponges, household cloths and any object that can Load cutlery and dishes into the dishwasher. absorb water may not be washed in the dishwasher. Fill with dishwasher detergent .
The cutlery basket The upper basket The upper basket is designed for plates (dessert plates, Long bladed knives stored in an upright position are a saucers, dinner plates of up to 24 cm in diameter), salad potential hazard. bowls, cups and glasses. Long and/or sharp items of cutlery such as carving knives must be positioned horizontally in the upper basket.
Adjusting the height of the upper basket Use of detergent If washing very large plates you can load them in the lower Only use detergents specifically designed for use in basket after moving the upper basket to the higher position. dishwashers.
Different kinds of detergent Detergent tablets Detergent tablets from different manufactures dissolve at different rates. For this reason, some detergent tablets do not attain their full cleaning power during short washing programmes. Therefore please use long washing programmes when using detergent tablets, to ensure the complete removal of detergent residuals.
Washing programmes Programme Degree of soil Options available Cycle (2) Consumption values with the description Energy Water type of load programme consumption consumption (in kWh) (in litres) 1 cold rinse (to avoid food scraps from sticking Any. together). Partial load (to be completed Rinse and Hold This programme does not later in the day).
Starting a washing programme In this fully integrated appliance the controls are located on the 5. To interrupt or cancel a washing top of the door. When selecting a programme, the door needs programme in progress to be open. Interrupt or cancel a washing programme in progress ONLY if it’s absolutely necessary 1.
Page 18
"3 in 1" function This function can be selected together with all programmes. Place the 3 in 1 combi detergent tablet in the detergent dispenser. Press the "On/Off" button. Press the 3 in 1 function button, the correspondent indicator light illuminates. Remember that if this function is selected, it will remain active also for the following programmes, until it will be deactivated by pressing the 3 in 1 function button (indicator light off).
Maintenance and cleaning Clean the external surfaces of the machine and control panel Attention! with a damp soft cloth. If necessary use only neutral Under no circumstances may the dishwasher be used without detergents. Never use abrasive products, scouring pads or filters.
What to do, when... Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the instructions given here, without calling out an engineer..a flashing fault code appears The dishwasher will not start or stops during operation. The intervention of an alarm is indicated by a sequence of intermittent audible signals.
...the wash results are not satisfactory The dishes are not clean The wrong washing programme has been selected. The dishes were arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded. The spray arms do not rotate freely due to wrong arrangement of the load.
Hints for test centres Testing in accordance with EN 60704 must be carried out with appliance fully loaded and using the test programme (see "Washing programmes" chart). Test in accordance with EN 50242 must be carried out when the salt dispenser and rinse aid container have been filled with salt and rinse aid respectively and using the test programme (see "Washing programmes"...
Page 23
Boretti B.V. De Dollard 17 - 1454 AT - Watergang. www.boretti.nl <http://www.boretti.nl> Belangrijke telefoonnummers: Storingen 0900-2352673 Onderdelen 0900-7727372 Overige vragen 020-4363439 Änderungen vorbehalten 11/05 Subject to change without notice 152960 81/2...
Need help?
Do you have a question about the MVW 681 and is the answer not in the manual?
Questions and answers