Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for M-system MVW 680
Summary of Contents for M-system MVW 680
- Page 1 MVW 680 Bedienungsanleitung Geschirrspüler instruction book dishwasher...
-
Page 2: Table Of Contents
Contents Safety instructions Installation instructions Building-in Disposal Levelling Fixing to adjacent units Economical and ecological dishwashing Water supply connections Description of the appliance Water inlet hose with safety valve Water outlet hose connection The control panel Electrical connection Prior to using for the first time Hints for test centres Setting the water softener Filling with salt... -
Page 3: Safety Instructions
Safety instructions It is most important that this instruction book should be Under no circumstances should you attempt to repair the retained with the appliance for future reference. Should machine yourself. Repairs carried out by inexperienced the appliance be sold or transferred to another owner, or persons may cause injury or serious malfunctioning. -
Page 4: Description Of The Appliance
Description of the appliance Upper basket stop Water hardness switch Salt container Detergent dispenser (type A / type B) Control panel Rating plate Rinse aid dispenser (type A / type B) Filters Lower spray arm 10. Upper spray arm 11. Upper basket IN143 The control panel Function push buttons:... -
Page 5: Audible Signals
Audible signals Audible signals have been introduced to help indicate which operations the dishwasher is performing: "Setting of the water softener" "End of programme" "Something not working with the machine" Deactivation/activation of the audible signals (The dishwasher must be switched off) 1. -
Page 6: Prior To Using For The First Time
Prior to using for the first time Before using your dishwasher for the first time: Setting electronically 1. Ensure that the electrical and water connections comply (The dishwasher must be switched off) with the installation instructions The dishwasher is factory set at level 5. If it’s necessary to set 2. -
Page 7: Filling With Salt
Filling with salt Rinse aid Rinse aid is automatically added during the last rinse, ensuring Special salt can be added in one of two ways: thorough rinsing, and spot and streak free drying. The dispenser, which is positioned inside the door, holds about 110 If you are using dishwasher detergent that already contains ml of rinse aid, which is sufficient for 16 - 40 dishwashing salt, the detergent including the salt is placed in the... -
Page 8: Filling With Rinse Aid
Filling with rinse aid Deactivation/activation of the inflow of (Rinse aid dispenser type B) rinse aid (The dishwasher must be switched off) 1. Open the container by turning the lid (A) anticlockwise. 2. Add the rinse aid until the container is completely full. The When the inflow of rinse aid has been deactivated, also maximum level for filling is indicated by "max". -
Page 9: In Daily Use
In daily use Check if it’s necessary to refill with special salt or rinse aid Load cutlery and dishes into the dishwasher. Fill with dishwasher detergent . Select a wash programme suitable for the cutlery and dishes. Start the wash programme. Loading cutlery and dishes Sponges, household cloths and any object that can absorb water may not be washed in the dishwasher. -
Page 10: The Cutlery Basket
In case that plates are loaded in the upper The cutlery basket basket: Long bladed knives stored in an upright position are a load them starting from the potential hazard. rear positions of the basket; Long and/or sharp items of cutlery such as carving knives tilting them slightly forwards must be positioned horizontally in the upper basket. -
Page 11: Use Of Detergent
Use of detergent Detergent tablets Detergent tablets of different brands dissolve at different Only use detergents specifically designed for use in speeds. For this reason some detergent tablets cannot dishwashers. develop their full cleaning power during short programmes. Using no more then the correct amount of detergent Therefore please use normal programmes with prewash when contributes to reducing pollution. -
Page 12: Washing Programmes
Washing programmes Programme Degree of soil Cycle (3) Consumption values description Programme duration Energy Water type of load (in minutes) consumption consumption (in kWh) (in litres) Any. 1 cold rinse (to avoid food Partial load (to be completed scraps from sticking Rinse and Hold later in the day). -
Page 13: Starting A Washing Programme
Starting a washing programme In this fully integrated appliance the controls are located on the To cancel a washing programme in top of the door. When selecting a programme, the door needs progress to be open. Open the dishwasher door. Press simultaneously the function push buttons 2 and 3 for about 2 seconds, the indicator lights of the programme 1. -
Page 14: End Of The Washing Programme
7. End of the washing programme The dishwasher will automatically stop and 3 intermittent audible signals of about 15 seconds each, alternated one from another with a pause of 3 minutes, inform you of the end of the washing programme. Hot steam may escape from the appliance when opening the door immediately after the end of the programme, therefore, open the door carefully. -
Page 15: Maintenance And Cleaning
Maintenance and cleaning Clean the external surfaces of the machine and control panel To ensure a correct with a damp soft cloth. If necessary use only neutral working of the dishwasher, detergents. Never use abrasive products, scouring pads or NEVER try to remove the solvent (acetone, trichloroethylene etc..). -
Page 16: What To Do, When
What to do, when... Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the instructions given here, without calling out an engineer..a flashing fault code appears The intervention of an alarm is indicated by a combination of flashing indicator lights, audible signals and a visible fault code in the digital display, as indicated in the following chart. -
Page 17: Service And Spare Parts
...the wash results are not satisfactory The dishes are not clean The wrong washing programme has been selected. The dishes were arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded. The spray arms do not rotate freely due to wrong arrangement of the load. -
Page 18: Installation Instructions
Installation instructions Any electrical and/or plumbing work required to install Do not use, for connection, old hoses which have been this appliance should be carried out by a qualified used in another appliance. electrician and/or plumber or competent person. If the machine is connected to new pipes or pipes which have Remove all packaging before positioning the machine. -
Page 19: Water Outlet Hose Connection
Water outlet hose connection Electrical connection The end of the drain hose can be connected in the following Information concerning the electrical connection is given on the ways: rating plate on the edge of the dishwasher’s door on the right. 1. -
Page 20: Hints For Test Centres
Hints for test centres Testing in accordance with EN 60704 must be carried out with appliance fully loaded and using the test programme (see "Washing programmes" chart). Test in accordance with EN 50242 must be carried out when the salt dispenser and rinse aid container have been filled with salt and rinse aid respectively and using the test programme (see "Washing programmes"... - Page 21 Boretti B.V. De Dollard 17 - 1454 AT - Watergang. www.boretti.nl <http://www.boretti.nl> Belangrijke telefoonnummers: Storingen 0900-2352673 Onderdelen 0900-7727372 Overige vragen 020-4363439 Änderungen vorbehalten 0 03/03 152969 53/0 Subject to change without notice...
Need help?
Do you have a question about the MVW 680 and is the answer not in the manual?
Questions and answers