Step 1 Insert The Cam (Conditional Access Module) And Smart Card - Panasonic Diga DMR-EX93C Operating Instructions Manual

1
STEP Insert the CAM (Conditional Access Module) and Smart Card
You need a Conditional Access Module together with a valid Smart Card and a subscription with the corresponding CATV provider if you want to
watch/record encrypted digital CATV broadcasts.
1 Insert the certified Smart Card into the commercially available CAM (Conditional Access Module).
2 Insert the CAM into the CI (Common Interface) slot of this unit.
TV service encryption is automatically cancelled and the service can be viewed or recorded.
≥When using unencrypted digital terrestrial broadcasts or analogue broadcasts, you do not need to insert CAM. Proceed to STEP 2. (
The recording might be prohibited by broadcasters.
§
This unit's rear panel
RF
IN
VIDEO
AV1
L (TV)
R
RF
OUT
AUDIO
AV2
OUT OUT (EXT)
Adjust the position marks.
Note
≥Be sure to insert the CAM horizontally into the slot.
≥Do not insert the CAM and Smart Card upside down.
≥For more details, see the manual of the CAM and Smart Card, or consult the dealer.
≥The Common Interface supports the modules according to DVB Specification and CI Plus Specification.
≥Unplug the AC mains lead before you insert or remove the CAM with Smart Card. Remove it slowly.
COMMON INTERFACE
COMMON INTERFACE COMMON INTERFACE
AV OUT AV OUT
OPTICAL
AC IN
DIGITAL AUDIO OUT DIGITAL AUDIO OUT
(PC PCM/ M/BITSTREAM BITSTREAM)
AC IN
AC IN
2
§
CI (Common Interface) slot
CAM (Conditional Access Module)
1
Label facing
upwards
8)
Smart Card
VQT2J40
7