Panasonic Viera TH-65PV600E Operating Instructions Manual page 19

FAQs
Problem
Chaotic image, noisy
No image can be
displayed
Blurry or
distorted image
(no sound or low volume)
Neither image nor
sound is produced
No sound is produced
Sound level is low
or sound is distorted
Whirling sound is heard
36
Actions
•
Set "P-NR" in the Picture menu (to remove noise).
• (p. 16)
Check nearby electrical products
(car, motorcycle, fl uorescent lamp).
•
Is "Colour" or "Contrast" in the Picture menu set to the
minimum? (p. 16)
•
Reset channels. (p. 20)
•
Is the TV in "AV mode"?
•
Is the mains lead plugged into the socket outlet?
•
Is the TV turned On?
•
Check Picture menu (p. 16) and volume.
•
Is "Sound Mute" active? (p. 7)
•
Is the volume set to the minimum?
•
Sound signal reception may be deteriorated.
•
Set "MPX" (p. 16) in the Sound menu to "Mono".
•
The sound is from built-in cooling fan
(not a sign of faulty operation).
Problem
•
Set the sound setting of the connected equipment to
"2ch L.PCM".
•
Sound is unusual
Check the "HDMI1 / 3 input" setting in the Sound menu. (p. 16)
•
If digital sound connection has a problem, select analogue
sound connection. (p. 31)
•
An error message appears
Contact the authorized Service Centre.
•
"Control with HDMI" Switch the TV on again with the equipment on.
•
Set "Control with HDMI" to "Off", then set to "On" again.
function does not work
(p. 25)
•
TV goes into • The sleep function is activated.
The TV enters "Standby mode" about 30 min.
"Standby mode"
after broadcasting ends.
•
An error message
Follow the message's instructions.
•
If the problem persists, contact the authorized Service Centre.
appears
Actions
37