Panasonic Viera TH-65PV600E Operating Instructions Manual page 18

Technical Information
Input signal that can be displayed
COMPONENT (Y, P , P ), HDMI
B R
∗ Mark: Applicable input signal
Signal name
525 (480) / 60i
525 (480) / 60p
625 (576) / 50i
625 (576) / 50p
750 (720) / 60p
750 (720) / 50p
1,125 (1,080) / 60i
1,125 (1,080) / 50i
1,125 (1,080) / 60p
1,125 (1,080) / 50p
PC (D-sub 15P)
Signal name
640 × 400 @70 Hz
640 × 480 @60 Hz
640 × 480 @75 Hz
800 × 600 @60 Hz
800 × 600 @75 Hz
800 × 600 @85 Hz
1,024 × 768 @60 Hz
1,024 × 768 @70 Hz
1,024 × 768 @75 Hz
1,024 × 768 @85 Hz
1,280 × 1,024 @60 Hz
Macintosh13" (640 × 480)
Macintosh16" (832 × 624)
Macintosh21" (1,152 × 870)
Note
•
Signals other than above may not be displayed properly.
•
The above signals are reformatted for optimal viewing on your display.
34
COMPONENT HDMI
∗
∗
∗
∗
∗
∗
∗
∗
Horizontal frequency (kHz) Vertical frequency (Hz)
31.46 70.07
31.47 59.94
37.50 75.00
37.88 60.32
46.88 75.00
53.67 85.06
48.36 60.00
56.48 70.07
60.02 75.03
68.68 85.00
63.98 60.02
35.00 66.67
49.72 74.54
68.68 75.06
FAQs
Before requesting service or assistance, please follow these simple guides to resolve the problem.
If problem still persists, please contact your local Panasonic dealer or Panasonic Customer Care Centre
for assistance.
White spots or
∗
∗ shadow images
∗
(noise)
∗
∗
∗
∗
∗
∗
∗
•
Check the position, direction,
and connection of the aerial.
S-Video / black and
white picture
•
Using TV/AV button please confi rm
your selection is S-Video I.e. AV2/
S-Video or AV3/S-Video (p. 12).
logo appears
at the four corners
of the screen
Contrast is reduced
•
The function to prevent after-image
is activated.
(Not a faulty symptom)
● The screen saver is activated
if the TV is not operated for a
certain time in AV mode.
● Contrast is lowered when menu,
etc. lasts for several minutes.
● "after-image" (p. 5)
Only one part
remains dark
•
A pixel or luminescent spot may
occasionally be missing in plasma
displays.
(Not a faulty symptom)
Pictures from an
equipment are unusual
when the equipment is
connected via HDMI
•
Is the HDMI cable connected properly?
(p. 28)
•
Turn Off the TV and equipment, then turn
them On again.
•
Check an input signal from the equipment.
(p. 34)
•
Use an equipment compliant with
EIA/CEA-861/861B.
The remote control
does not work
•
Are the batteries installed correctly?
(p. 6)
•
Has the TV been switched On?
TV
35