Displaying Pc Screen On Tv; Editing And Setting Channels - Panasonic Viera TH-65PV600E Operating Instructions Manual

Editing and Setting Channels

Automatically set the channels received in the area
Start Auto setup
WARNING
All current tuning
data will be erased
Set
Start Auto Setup
Exit
Return
automatically
•
Auto setup
The settings are downloaded to a Q-Link
compatible equipment connected to the TV.
•
All previous settings are erased.
•
When the sequence is completed,
the broadcast of programme number
"1" will appear.
•
If tuning has not done completely
"Manual tuning"
To freely change settings after Auto setup
Select the programme number
and search through the channel
Programme Channel
number
1
CH12
Manual tuning
02 78:01
Search down/up
Store
Exit
Return
C 0 9 Direct entry
Set
manually
For Manual tuning, using the buttons on the TV
("Tuning mode" on p. 7)
Manual
tuning
(Press repeatedly until "Tuning mode" appears)
or (Access "Manual tuning")
(Programme, Channel (select), Sound system)
or (Change programme or start searching channels)
(Store)
-
(Repeat)
■
To return to TV
20
Select your country
set Country
Deutschland
Österreich
France
Italia
España
Portugal
Nederland
Danmark
Sverige
Norge
Suomi
Belgium
Schweiz
ELLADA
Polska
Česká republika
Magyarország
E.Eu
Settings are made automatically
CH12
AUTO SETUP IN PROGRESS
SEARCHING : PLEASE WAIT
02 78:01 41
Exit
Return
Store
•
search
•
41
The programme
number blinks.
Programme number (fl ash)
1
CH12
SC1
Channel number (fl ash)
Manual tuning
-, +
TV / AV : Move cursor
STR
Sound system (fl ash)
F
02
STR
STR
Channel

Displaying PC Screen on TV

The screen of the PC connected to the TV can be displayed on the TV.
You can also listen to PC sound with the audio cable connected. To connect PC (p. 28)
select
start
■
PC menu setting (changed as desired)
•
Making settings
Repeat
Menu
and
Viewing mode, Contrast, Brightness, Sharpness, Colour balance (p. 16)
Note
Advanced
If a VCR is
setting
connected with
only the RF
cable, select
programme
number "0".
PC
setup
: Search
: To store
: To exit
78:01 41
F - / + / TV / AV
F -
Control with HDMI, Volume correction, Side panel, Power save, SD card LED, OSD language (p. 16)
•
Sound menu (p. 16)
1 Select the external input
Select "PC"
2
(To next page)
blue
Press twice
yellow
■
To return to TV
"How to Use Menu Functions" to (p. 16)
Item Adjustments / Confi gurations (options)
W/B High R White balance of bright red area
W/B High B White balance of bright blue area
W/B Low R White balance of dark red area
W/B Low B White balance of dark blue area
Gamma (2.0 / 2.2 / 2.5 / S Curve)
Switches to a wide view
•
Input VGA (640 × 480 dots), WVGA (852 × 480 dots),
resolution XGA (1,024 × 768 dots), WXGA (1,366 × 768 dots)
•
Options change depending on signals
Clock Set to the minimum level if noise occurs
Adjust horizontal position
H-pos
Adjust vertical position
V-pos
Eliminate fl icker and distortion
•
Clock phase
Adjust after Clock adjustment
Chooses another synchronous signal if the image is distorted (H&V / On G)
•
Sync H&V : by the horizontal and vertical signals from your PC
On G : by the green signal from your PC (if available)
•
Corresponding signals
(p. 34)
•
If "H-freq." or "V-freq."
is shown in red, the
signals may not be
supported.
Displays PC screen
and
repeatedly adjusted
•
Set to the minimum level if noise occurs
21