Preparing The Plasma Display; Power On/Off - Panasonic TU-PT600E Operating Instructions Manual

2. Preparing the Plasma Display

INPUT — VOL +
R - STANDBY
G POWER ON
R - STANDBY
G - POWER ON
Power Indicator

3. Power On/Off

Power-Indicator
DIRECT TV REC ASPECT CH RETURN
PICTURE
SOUND
SET UP
TV/AV
TV/TEXT F.P. INDEX HOLD
1 2 3
(Refer to Operating Instructions of the Plasma Display)
Remote Control Sensor
Quick start Guide
Connecting the plug to the Wall Outlet
Push the Power switch on the Plasma Display to turn
the set on Power-On.
Power Indicator: Green
Connecting the plug to the Wall Outlet
Push the Power switch on this set to turn the set on
Power-On.
Power Indicator: Green
Example: The screen below is displayed for a while
after this set is turned on. (setting condition
is an example.)
For VIDEO / COMPONENT / TV INPUT:
1
Press the POWER button on the remote control to turn
this set off.
Power Indicator: Red (standby)
Press the POWER button on the remote control to turn
this set on.
Power Indicator: Green
Turn the power to this set off by pressing the power
switch on this set, when this set is on or in standby
mode.
Note:
The Receiver will still consume power as long as the
power cord is inserted into the wall outlet.
9