Tuning Your Vcr And Satellite Receiver; Tuning Your Receiver To The Vcr - Panasonic TU-PT600E Operating Instructions Manual

Tuning your VCR and satellite receiver

Your new set is supplied with programme position '0' set to receive an RF signal from your VCR, although a Scart
connection is preferable if the VCR is so equipped (see page 7, 8 or 39 for suitable inputs to the Scart socket on
this set.)
However, if for some reason your VCR is tuned to a different RF channel then you will not receive any picture or
sound from your VCR on programme position '0' of this set. Either adjust the tuning of this set's programme
position '0' (follow the instructions below) or adjust the RF channel of your VCR (some VCR's allow adjustment of
their RF channel via their remote control unit) or both until the Television receives the RF output channel of your
VCR.
It is intended that this advice is used in conjunction with the instruction books for your additional equipment.

Tuning your Receiver to the VCR

Switch on the VCR, insert and play a pre-recorded tape with known content.
DIRECT TV REC ASPECT CH RETURN
PICTURE
SOUND
SET UP
TV/AV
VCR
CH44
Programme
down / up
Serch
Return
down / up
TV/AV
E x i t
'STR' Button Store
Manual tuning
02 99:21 41
VCR
The tape with known content
is found and displayed.
STR
Pressing will store the
setting.
Notes:
• If picture patterning occurs on programme position '0' it may be necessary to adjust the RF output channel of the
VCR, refer to the VCR instruction book.
• If a Satellite Receiver and a VCR are going to be used with RF cable connections it is important to avoid both units
being set on the same channel.
Refer to the Satellite Receiver and VCR instruction books for precise tuning information.
28
SET UP
1
Press .
2
Move to chosen Tuning menu option by using
3
Access Tuning menu by using
4
Move to chosen Manual tuning by using
5
Access Manual tuning by using
6
Select programme position '0' VCR by using
7
Start searching for the VCR playback of the known content tape by using
or .
When the VCR playback is found, press
TV/AV
Pressing to exit.
or
or .
or .
or .
or
STR
to store.
.
.