Other Play Methods; Anti-Skip System; Program Play - Panasonic SL-CT780 Operating Instructions Manual

Other Play Methods

The letters such as A in the illustrations refer to the descriptions in the "Location of Controls" section (See page 2.).
Skip play
The disc plays from the selected track through to the
last track, then play stops automatically.
Preparation:
Put unit in stop mode.
1
Select the desired track.
6
F
:
2
E
1;

Anti-Skip System

This system deals with skipping in a variety
of ways:
≥The thinner and lighter construction makes the unit
less susceptible to vibration.
≥An anti-skip mechanism prevents skipping caused
when play speed changes due to swinging of the unit.
≥A recovery system immediately returns the laser pick-
up to its original position if it is knocked off the track by
a strong shock.
≥The anti-skip memory fills in interruptions caused by
bumps and vibrations.
5

Program play

Up to 24 tracks can be entered in the program.
Preparation:
1
Select the desired track.
5
F
9
2
Register in sequence.
(The indication "M" and the programmed se-
quence appear on the display.)
A
3
Repeat steps 1 and 2 to program all
the desired tracks.
4
E
∫ To program the same track in the se-
quence more than once
After step 2, press [MEMORY/RECALL] desired number
of times.
∫ If "'" is displayed
No more tracks may be programmed.
∫ To confirm the contents of the program
Press [MEMORY/RECALL] while the disc is playing.
(The numbers of the programmed tracks appear on the
display in sequence.)
∫ To delete the entire program
Press [∫, OPR OFF].
Note!
The repeat and random play modes are canceled after
steps 1 and 2.
The capacity of the anti-skip memory de-
pends on how you are using the unit.
≥When listening through stereo earphones
– up to 40 seconds.
≥When connected to an audio system with a
stereo connection cable (analogue) through
[OPT OUT/OUT]
– up to 10 seconds.
≥When an optical cable (digital) is connected to
[OPT OUT/OUT]
– anti-skip memory is off.
By automatically changing the function, the unit allows
you to listen to high-quality, uncompressed digital audio
when connected to an audio system.
Put unit in stop mode.
6 5
: 9
MEMORY/
RECALL
1;
Right side
[OPT OUT/OUT]
Repeat play/Random play
Press during play or stop mode.
MODE
B
The setting is switched in the sequence indicated below
each time [MODE] is pressed.
1-track repeat (1 `)( ----------------]
One track is repeated.
v
All-track repeat (`)
All the tracks on the disc are repeated. |
v
Random (RANDOM)
The tracks play once each in random
order and then play stops.
v
Random repeat (` RANDOM) |
The tracks play repeatedly in random
order.
v
--------------}
Cancel (no indicator is shown)
When pressed during program play
The setting is switched in the sequence indicated below
each time [MODE] is pressed.
1-track repeat (1 ` M)(------------]
One track is repeated.
v
Memory repeat ( ` M)
The programmed tracks are repeated. |
v
-------------------------------------------}
M
Cancel ( )
Note!
≥You can select the first track to play in random play
and random repeat play by pressing [9] while the
disc is stopped. All the tracks are played.
≥You cannot select random play or random repeat play
during program play.
When bumps continue repeatedly
The message "SORRY" appears on the display and
sound is interrupted.
SORRY
VOL
ALL 1 M
RANDOM
S
-
LIVES XBSTRAIN
Note!
≥While the system is on, the disc rotates at a higher
rate than usual in collecting extra audio data. This
could result in a slight increase in disc rotation noise.
≥The 40-second anti-skip memory compresses digital
signals.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RQT5645