Levelling The Appliance - Panasonic NA-140VS4 Operating Instructions & Installation Instructions

Installing the anchor bolts
1. Unscrew and remove the cover caps.
2. Pull the bolts out until their tips are
level with the tips of the sleeves.
Have someone else hold the top of the
drum and pull it forward.
3. Insert the transportation guards.
4. Tighten each bolt so that spring
extends out by 26 mm.
Same level
26 mm
Moving and Installing

Levelling the appliance

Using a level facilitates the making of
adjustments.
To adjust the stands, use the 'A' end of the
spanner.
1. On each stand, loosen the lock nut by
turning it clockwise.
2. Adjust each stand by turning it
clockwise or anticlockwise.
3. Use a spirit level to make sure that
the appliance is properly levelled.
4. Tighten each lock nut by turning it
anticlockwise.
Caution
Make sure that all lock nuts are
tightened securely and the stands
are still bolted to the appliance.
If they are unbolted, the appliance will
move around.
Installation Instructions - 35
Lock nut
Stand