Preparation For Power Source; Setting The Clock - Panasonic MW-20 Operating Instructions Manual

Preparation for power source

Slide it in fully.
B
• Use the appropriate AC plug for your country.
Back of product
AC adaptor
2
terminal
To remove the AC adaptor from the household
mains socket
Hold the AC adaptor fi rmly and pull it out straight.
Note
• While using this unit, the AC adaptor may become a little
hot. This is not a malfunction.
• The included AC adaptor is for use with this unit only.
Do not use it with other equipment. Also, do not use AC
adaptor from other equipment with this unit.
• Do not use any other AC adaptors except the supplied
one.
• The unit is in the standby condition when the AC adaptor is
connected. The primary circuit is always "live" as long as
the AC adaptor is connected to an electrical outlet.
A
1
A AC plug
B AC adaptor
To household
mains socket
3

Setting the clock

This unit is equipped with the clock/calendar and timer
functions. Set the time fi rst.
1. Press [^].
• You can also press [8] on the main unit.
(For Latin America, Asia and Middle East,
[POWER 8] is used.)
2. Press [MENU].
Menu
Slideshow
Single View
Select Photos
Clock
Photo Menu
iPod Play/Pause
iPod Display
iPod Play Menu
Select Item OK
3. Press [e, r, w, q] to select "Settings Menu" and
press [OK].
Menu
Audio Menu
Settings Menu
Select Item OK
4. Press [e, r, w, q] to select "Clock/Calendar
Settings" and press [OK].
5. Press [e, r] to select "Set Clock" and press [OK].
6. Press [w, q] to select the items (Date, Month,
Year, Hour and Minute ), and press [e, r] to set.
7. Press [OK].
• The clock starts from 00 second.
When the introduction screen for the time
setting appears
If you attempt to operate a function that requires time setting
while the time is not set, the introduction screen for the time
setting appears.
1. Press [e, r] to select "Set time" and press [OK].
2. Press [w, q] to select the items (Date, Month, Year, Hour
and Minute ), and press [e, r] to set.
3. Press [OK].
"AM/PM" is displayed when "12-hour System" is selected.
( P20)
To display the clock
1. Press [MENU].
2. Press [e, r, w, q] to select "Clock" and press [OK].
Note
• Period that can be set: January 2000 to December 2099.
• There is a small precision error of the clock. Periodical time
correction is recommended.
7