Power Saving Use; Using The Setup Menu - Panasonic MW-20 Operating Instructions Manual

Power saving use

Using the light sensor, adjust the brightness of the main unit's
display according to the surrounding brightness and set the
auto power off when the surrounding area becomes dark.
A
A Light sensor
1. Press [MENU].
2. Press [e, r, w, q] to select "Settings Menu" and
press [OK].
3. Press [e, r, w, q] to select "Power Save
Settings" and press [OK].
4. Press [e, r] to select "C.A.T.S." or "Auto Power
Off" and press [w, q] to select the setting.
5. Press [MENU] to close the menu screen.
Setting items
Factory settings are indicated with underlines.
C.A.T.S.
(Contrast Automatic
Tracking System)
Auto Power Off
When the auto power off is set to Enable
• "The power will soon be turned off automatically." is
displayed at the bottom of the screen 1 minute before the
auto power off function is activated.
Note
• " " presents approximation.
• While copying photos, etc., "Auto Power Off" does not
function even without operation.
• If the light sensor is blocked with fi nger, etc., brightness
cannot be detected.
• With the power save setting enabled, when you set the unit at
a place where light is diffi cult to reach the rear side of the unit,
such as in a cabinet or near a dark-coloured wall, the screen
may become dark automatically or the power may be turned
off automatically, even if the surrounding area is bright.
20
Back of product
When this is set to On, the darker
the surrounding area becomes,
the darker the screen becomes.
(3 levels)
On (Display):
When the power consumption
is reduced, the number of "
increases (up to 3).
On (No display):
" " is not displayed.
Off:
The screen brightness is fi xed.
Enable:
When the surrounding area
becomes dark and the following
conditions continue 1 minute or
more, the power is automatically
turned off.
– No operation
– Not during audio playback of
iPod/iPhone
Disable:
The power is not automatically
turned off.

Using the setup menu

You can format the internal memory, initialise this unit, etc.
Basic operation
1. Press [MENU].
2. Press [e, r, w, q] to select "Settings Menu" and
press [OK].
3. Press [e, r, w, q] to select the item
( below and P21) and press [OK].
Settings Menu
Power Save Settings
Timer
Clock/Calendar Settings
View Demo
Remote Control Mode
Wall-mount Setting
Panasonic Logo
Language Setting
Select Item
4. Press [e, r, w, q] to select the item or setting.
5. Press [MENU] to close the menu screen.
Factory settings are indicated with underlines.
Power Save Settings
Timer
"
Clock/Calendar
Settings
OK
left
P18
This adjust the clock, set different
colours for holidays and
Saturdays, etc.
Set Clock ( P7)
Holiday Settings
Select the date you want to set
and set the same colour as that
for Sundays.
1. Select "Holiday Settings" in
step 4 in the basic operation
and press [OK].
2. Set "Date", "Month" and "Year"
and press [OK].
3. Select "On" in "Holiday Setting".
4. Select "Every Year" or "No" in
"Repeat".
Every Year:
Set the same colour for the
same date/month every year as
that for Sundays.
No:
Set the same colour for the
set date/month/year as that for
Sundays.
Saturday Setting (On/Off)
Displayed with a different colour
from that for Monday to Friday
when it is On.
Set Date Indication
Select "Date/Month/Year" or
"Month/Date/Year".
Set Clock Indication
Select "24-hour System" or
"12-hour System".