Table of Contents
Advertisement
When "View Demo" is selected in
the basic operation ( P20), the
Demo is displayed.
And the demo function is
automatically activated when the
following conditions continues
2 minutes or more without
operation.
•
When the SD card is not
View Demo
inserted
•
When the iPod/iPhone is not
connected
•
When there are no photos in the
internal memory
To stop displaying the demo,
press any of the buttons other
than the power button on the main
unit or the remote control.
Change the remote control mode
when malfunction occurs on this
unit while using the remote control
of other devices.
Remote Control 1 / Remote
Control 2
Example: When setting the
remote control mode to 2
1. Select "Remote Control 2" in
step 4 in the basic operation
( P20) and press [OK].
Remote Control
("Simultaneously press
Mode
[CLOCK] and [OK] on your
remote control for at least
2 seconds, and change the
mode on your remote control."
is displayed.)
2. Press and hold [OK] on the
remote control without aiming
it at this unit, and press and
hold [CLOCK] for more than
2 seconds.
3. Press [OK].
Wall-mount Setting
P23
Select "On" or "Off" in step 4 in
the basic operation ( P20) and
press [OK].
Panasonic Logo
On:
Lights up logo
Off:
Lights off logo
(For the United Kingdom
and continental Europe
English / Deutsch / Français
only)
Language Setting
This unit's settings are restored
to the factory defaults. The clock
setting, wall-mount setting and
photo fi les in the internal memory
remain unchanged.
Initialise Settings
1. Select "Yes" in step 4 in the
basic operation ( P20) and
press [OK].
2. Select "Yes" again and press
[OK].
All the data in the SD card will be
deleted.
1. Select "Yes" in step 4 in the
Format Card
2. Select "Yes" again and press
You can initialise (format) the
internal memory. All photo data
in the internal memory will be
deleted.
1. Select "Yes" in step 4 in the
2. "Photos set as protected
Format Internal
Memory
•
Protected photos are also
deleted.
•
For using the physical format,
see page 6.
You can confi rm the system
System Software Info
software information (version) of
this unit.
This is a function when updating
the system software is necessary
in the future to improve the
performance.
Update System
Please make sure to complete
Software
user registration which is
necessary to receive information
related to the system software
update.
The audio is automatically stopped (paused) if it is being
played back.
When setting the remote control mode to 1
1. Select "Remote Control 1" in step 4 in the basic operation
( P20) and press [OK].
2. Press and hold [OK] on the remote control without aiming
it at this unit, and press and hold [SLIDESHOW] for more
than 2 seconds.
3. Press [OK].
Note
•
When the same date/month/year is set for "Holiday
Settings" and "Saturday Setting", "Holiday Settings" takes
priority.
•
When the display mode is set to vertical arrangement
( P8), or "Adjust Brightness" ( P14) is set to "1", the
Panasonic logo does not light on even if "Panasonic Logo"
is set to "On".
•
For the latest version of information, see the following
homepage.
http://panasonic.jp/support/global/cs/audio/
basic operation ( P20) and
press [OK].
[OK].
basic operation ( P20) and
press [OK].
will also be deleted. Do you
really want to perform this
operation?" is displayed, and
then select "Yes" again and
press [OK].
21
Advertisement
Table of Contents
