Charging And Recording Time - Panasonic HC-X920 Operating Instruction

Charging and recording time

∫ Charging/Recording time
≥ Temperature: 25 oC/humidity: 60%RH
≥ When using the viewfinder (times in parentheses are when using the LCD monitor)
Battery model number
[Voltage/Capacity
(minimum)]
Supplied battery/
VW-VBN130 (optional)
[7.2 V/1250 mAh]
* This will be the recording mode when the 3D Conversion Lens (optional) is attached.
≥ These times are approximations.
≥ The indicated charging time is for when the battery has been discharged completely.
Charging time and recordable time vary depending on the usage conditions such as high/
low temperature.
≥ The actual recordable time refers to the recordable time when repeatedly starting/stopping
recording, turning the unit on/off, moving the zoom lever etc.
∫ Battery capacity indication
The battery capacity indication is displayed on the LCD monitor.
≥ If there is less than 3 minutes remaining, then
then will flash. Recharge the battery or replace it with a fully charged battery.
12
VQT4R21
Charging Recording
time mode
[1080/50p],
[AVCHD 3D]*
[PH], [HA],
2 h 30 min
[HG], [HE]
[iFrame],
[SbS 3D]*
Maximum
continuous
recordable time
1 h 25 min
(1 h 15 min)
1 h 30 min
(1 h 20 min)
1 h 35 min
(1 h 20 min)
will become red. If the battery discharges,
Actual
recordable
time
55 min
(45 min)
55 min
(50 min)
55 min
(50 min)