Charging The Battery - Panasonic HC-V110 Operating Instruction

Charging the battery

When this unit is purchased, the battery is not charged. Charge the battery fully before
using this unit for the first time.
∫ Charging with an AC adaptor.
The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always
"live" as long as the AC adaptor is connected to an electrical outlet.
Important:
≥ It is recommended to charge the battery in a temperature between 10 oC and 30 oC. (The
battery temperature should also be the same.)
/
≥ Use the supplied AC adaptor. Do not use the AC adaptor of another device.
≥ Do not use the AC cable with any other equipment as it is designed only for this unit. Also,
do not use the AC cable from other equipment with this unit.
≥ The battery will not be charged if the unit is turned on.
≥ The AC adaptor and USB cable are for use with this unit only. Do not use them with other
equipment. Similarly, do not use AC adaptors and USB cables from other equipment with
this unit.
≥ The battery cannot be charged when the power is on. Press the power button to turn off
the power. (l 17)
/
A DC input terminal
≥ Insert the plugs as far as they will
go.
1
Connect the AC cable to the AC
adaptor, then the AC outlet.
2
Connect the AC adaptor to the DC
input terminal [DC IN].
≥ Be careful not to pinch the DC input terminal
cover.
≥ The status indicator will flash red for approx.
2 seconds (off for approx. 1 second, on for
approx. 1 second), indicating that charging
has begun.
It will turn off when the charging is
completed.
11
VQT4T56