Panasonic GP-US522CUE Operating Instruction page 17

3-2. AGC detection control area setting (AGC CONT)
1. Set the ELC ON/OFF selector on the front panel of
the camera control unit to the OFF position. Then
confirm that the ELC parameter is OFF.
ON
OFF
ELC
2. Move the cursor to the ELC parameter and press
the PAGE button.
The AGC CONT menu appears.
** AGC CONT **
AREA
PEAK/AVE
RET END
3. Follow step 3 descrebed for "3-1. ELC detection
control area setting (ELC CONT)" to select the
desired detection area (AREA).
4. Follow steps 1 and 2 descrebed for "3-1-2. Peak
and Average Weight Control (PEAK/AVE)" to set
the detection value.
4. Electronic Shutter Speed Setting
(SHUTTER)
Note: When ON is selected for ELC on the SETUP
menu, this item is not available. To select the
electronic shutter speed, select OFF for ELC
on the SETUP menu.
You can select an electronic shutter speed of 1/120,
1/250, 1/500, 1/1 000, 1/2 000, 1/4 000 or 1/10 000 sec-
onds. The shutter speed can also be set manually.
** SET UP **
CAMERA ID
FLD/FRM
ELC
SHUTTER
GAIN
SYNC
BLACK BAL
SCENE FILE
END
ALL
P....I....A
*OFF
FLD
*OFF
OFF
AUTO
INT
ABC
*SCENE1
1. Move the cursor to the SHUTTER parameter.
2. Select the shutter speed or MANU for manual set-
ting from the following values:
*MANU OFF (1/50)
1/500 1/1000
3. If you have selected MANU, press the PAGE but-
ton. The SHUTTER menu appears and the MANU
SET parameter starts blinking.
CAMERA ID
FLD/FRM
ELC
SHUTTER
GAIN
SYNC
BLACK BAL
SCENE FILE
END
** SHUTTER **
MANU SET
RET END
4. Select the desired electronic shutter speed by
pressing A or B. The adjustable range is 1/625-
311/625 lines.
5. Gain Control Setting (GAIN)
You can set the gain (brightness level portion of an
image) to automatic level adjustment (AUTO) or
manual level adjustment (MANU).
CAMERA ID
FLD/FRM
ELC
SHUTTER
GAIN
SYNC
BLACK BAL
SCENE FILE
END
1. Move the cursor to the GAIN parameter.
2. Select AUTO or MANU. The gain of the video
amplifier is changed according to the position of
the automatic/manual
(HIGH/LOW/OFF) on the front panel of the camera
control unit.
-15-
1/120 1/250
1/2000 1/4000 1/10000
** SET UP **
*OFF
FLD
*OFF
*MANU
AUTO
INT
ABC
*SCENE1
100/625
** SET UP **
*OFF
FLD
*OFF
OFF
AUTO
INT
ABC
*SCENE1
gain
Blinking
selector