Recording Mode; About Recording; Recording On A Tape - Panasonic NV-GS22 Operating Instructions Manual

Recording Mode

About Recording

When recording pictures on a tape, set the Mode
Dial to Tape Recording Mode [
When recording with the
[AUTO/MANUAL/FOCUS] Switch
[AUTO], the Movie Camera automatically adjusts
the focus and white balance. In some cases, they
cannot be adjusted automatically and need to be
adjusted manually. (
-24-
(44)
AUTO
MANUAL
FOCUS
≥Before turning on the power, remove the
Lens Cap. If the Lens Cap is still attached
when the power is turned on, Automatic
White Balance Adjustment (
function correctly.
≥When the Recording Pause Mode continues for
more than 6 minutes, the power is turned off
automatically for tape protection and power
conservation. (If the AC Adaptor is used, the
power is turned off only when the tape is
inserted in Tape Recording Mode.) When the
tape is inserted in Tape Recording Mode and if
the Recording Pause Mode continues for more
than 6 minutes, the power is turned off
automatically.
To resume recording from this condition, turn
off, then turn on the power again.
ª Recording Lamp
The Recording Lamp (16)
recording and alerts those being recorded that
recording is in progress.
(16)
≥The Recording Lamp does not light up if the
[REC LAMP] on the [INITIAL] Sub-Menu is set
to [OFF].

Recording on a Tape

1
Set the [OFF/ON] Switch
Recording Mode
].
(44)
set to
, )
-25-
) may not
-24-
lights up during
(42) to [ON].
≥The [POWER] Lamp
ON
(42)
(43)
2
Set the Mode Dial
Mode.
(39)
3
Press the Recording Start/Stop Button
≥Recording starts.
≥After the [RECORD] is displayed, it changes
to [REC].
(41)
4
Press the Recording Start/Stop Button
again to pause the recording.
≥The [PAUSE] Indication is displayed.
ª To Check the Recording
By pressing the [S] Button
Recording Pause Mode, you can play back the
last few seconds of the recorded scene.
S
(7)
REC
≥The [CHK] Indication is displayed. After
checking, the Movie Camera resumes the
Recording Pause Mode.
ª Finding the End of Recording
(Blank Search Function)
The Blank Search Function aids you to locate the
end of the recording on the Cassette quickly.
-17-
(43)
lights up.
(39)
to Tape Recording
(41)
REC
RECORD
(41)
PAUSE
PAUSE
(7) briefly in the
.