Frequently Asked Questions; Machine Problems - Miele CVA 2660 Operating Instructions Manual

Repairs to electrical appliances should only be carried out by a suitably
qualified person in accordance with local and national safety regulations.
Repairs and other work by unqualified persons could be dangerous. The
manufacturer cannot be held responsible for unauthorized work.
– Is the unit locked?
– Is the lighting set too low?
The contrast or brightness of the
displays are too low / high.
The unit has no power.
– Is the machine plugged in?
– Is the machine programmed to
switch off after a programmed
time?
– The water temperature may be too
high.
– If not, the light bulb has burnt out.
Contact the Miele Service Department.
– Adjust the lighting.
Adjust the display contrast / brightness.
– Is the main switch turned off?
– Is the machine plugged in?
– Check that the fuse is not defective.
If so contact the Miele Service
Department.
– Plug the machine in.
– The machine turns off into standby
mode when not used for the
programmed time.
– The unit is blocked until the water has
cooled.
47