Installation; Location; Climate Range; Ventilation - Miele FN 1432 S Operating And Installation Instructions

Appliances without side wall heating
must not be installed "side-by-side"
next to another refrigerator or
freezer.
Do not place any appliance which
gives off heat, such as a toaster or
microwave oven, on top of this
appliance, as this would increase
the appliance's energy consumption.

Location

It should not be installed where it is
exposed to direct sunlight or directly
adjacent to a heat-producing appliance
such as an oven or a radiator. The
appliance should be installed in a dry
well-ventilated room.
The higher the ambient temperature of
the room the more energy the
appliance requires to operate.

Climate range

The appliance is designed for use
within certain climate ranges (ambient
temperatures), and should not be used
outside this range. The climate range of
this appliance is stated on the data
plate inside the appliance.
Climate range
SN
N
ST
T
SN-ST
SN-T
The appliance will function perfectly
down to a temperature of +5 °C.
Ambient room
temperature
+10 °C to +32 °C
+16 °C to +32 °C
+18 °C to +38 °C
+18 °C to +43 °C
+10 °C to +38 °C
+10 °C to +43 °C

Ventilation

Air at the back of the appliance gets
warm. To ensure sufficient ventilation,
the ventilation grilles must not be
covered over. The air inlet and outlet
must not be covered or blocked in any
way. They should be dusted on a
regular basis.

Installation

^ Remove any cable clips from the
back of the appliance.
^ Check that all parts at the back of the
appliance are unhindered. Remove
any hindrance.
^ Carefully push the appliance into
position.

Aligning the appliance

^ To align the appliance, adjust the feet
using the spanner supplied.
Installation
31