Switching On And Off; Switching Off For Longer Periods Of Time - Miele FN 1432 S Operating And Installation Instructions

Switching on and off

Before using for the first time
^ Clean the inside of the appliance and
the accessories with warm water and
a little washing up liquid, and then
dry with a soft cloth.
Important:
To ensure the correct functioning of
the appliance, let it stand for
between ½ and 1 hour after
transporting it to its final location
before connecting it to the mains.
Switching on
^ Using a coin, turn the On/Off dial in a
clockwise direction away from the "0"
position until the temperature display
lights up.
Forcing it beyond its range will
damage it. Turn it only as far as it will
go, then turn it back again.
An alarm sounds and the alarm
indicator light comes on. The appliance
starts cooling.
Allow the appliance to run for a few
hours before placing food in it. This will
ensure that the temperature is
sufficiently low.
12
Switching off the alarm
^ Press the alarm off button.
The alarm will stop. The indicator light
remains on until the temperature in the
freezer is sufficiently low.
Cool pack
Place the cool pack in the top drawer or
to save space on the freezer tray. The
cool pack will be at its most effective
after it has been in the freezer for
approx. 24 hours.
Switching off
^ Using a coin, turn the On/Off dial in
an anti-clockwise direction back to
the "0" position.
All indicator lights go out and the
cooling process is switched off.
Switching off for longer
periods of time
If the appliance is not going to be used
for a longer period of time, e.g. whilst
on holiday,
^ switch the appliance off,
^ switch off at the wall socket and
withdraw the plug,
^ clean the appliance out and
^ leave the door ajar to air the
appliance.