Product Service; Specifications - Panasonic RX-ES27 Operating Instructions Manual

Portable stereo cd system
Table of Contents

Advertisement

Product Service

1. Damage requiring service —The unit should be serviced by
qualified service personnel if:
(a) The AC power supply cord or AC adaptor has been damaged;
or
(b) Objects or liquids have gotten into the unit; or
(c) The unit has been exposed to rain; or
(d) The unit does not operate normally or exhibits a marked
change in performance; or
(e) The unit has been dropped or the cabinet damaged.
2. Servicing—Do not attempt to service the unit beyond that
described in these operating instructions. Refer all other
servicing to authorized servicing personnel.
3. Replacement parts—When parts need replacing ensure the
servicer uses parts specified by the manufacturer or parts that
have the same characteristics as the original parts.
Unauthorized substitutes may result in fire, electric shock, or
other hazards.
4. Safety check—After repairs or service, ask the servicer to
perform safety checks to confirm that the unit is in proper
working condition.
Product information
For product information or assistance with product operation:
Contact Panasonic Canada Inc. Customer Care Centre at
905-624-5505, web site (www.panasonic.ca), or an authorized
Servicentre closest to you.
RQT6274-C (15-22)En1
21

Specifications

Radio
Frequency range
FM
87.9 – 107.9 MHz (200 kHz steps)
87.5 – 108.0 MHz (100 kHz steps)
AM
CD player
Sampling frequency
Decoding
Beam source
Semiconductor laser (wavelength 780 nm)
No. of channels
Wow and flutter
D/A converter
Tape recorder
Track system
Monitor system
Recording system
Erasing system
Frequency range
Normal position
General
Speakers
Jacks
Output
PHONES: 3.5 mm stereo (16 – 32 )
Power requirement
AC
Battery
12 V [Eight R20/LR20 (D, UM-1) batteries]
Do not use rechargeable type batteries.
Memory back-up for computer/clock
6 V [Four R6/LR6 (AA, UM-3) batteries]
Do not use rechargeable type batteries.
Dimensions (W x H x D)
Mass
4.5 kg (9 lb. 15 oz.) without batteries
Power consumption in standby mode: 3.1 W
Note
Specifications are subject to change without notice.
Mass and dimensions are approximate.
12/13/01, 4:06 PM
520 – 1710 kHz (10 kHz steps)
44.1 kHz
16 bit linear
2 channel, stereo
Below measurable limit
MASH (1 bit DAC)
4 track, 2 channel, stereo
Variable sound monitor
AC bias
Multi Pole magnet
50 Hz – 14000 Hz
8 cm 5.4
x 2
120 V, 60 Hz
Power consumption: 32 W
529 x 144 x 276 mm
13
11
7
(20
/
˝ x 5
/
˝ x 10
/
˝ )
16
32
8
21
RQT6274

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents