All-Rec - Panasonic RX-ES27 Operating Instructions Manual

7
7
4
3
7
1
TAPE CD
7
2
7
3
DECK
7
4
RQT6274-C (15-22)En1
7
7
1
2
15
Recording CDs

ALL-REC

Records the whole CD or selected tracks. When the tape finishes
before CD, recording and CD pauses for you to resume recording on
the opposite side.
\
Preparation: Insert a CD ( page 10).
Press [ L TAPE/CD] to switch to CD mode.
1
Press [ CD REC MODE ] to display "ALL-REC".
2
Each time you press the button:
ALL-REC 1-REC OFF
The display shows the tape length needed.
"C – – – –" indicates the tape needed exceeds 100 minutes.
You can still record, but some tracks may not be recorded if the
tape isn't long enough.
Press [0 DECK] to open the deck and load a cas-
3
sette with the side for recording facing up.
Press [ a/ J ] to start recording.
4
The unit rewinds the tape, records 10 seconds of silence, and
then starts recording.
To stop recording
Press [L TAPE/CD]. The CD also stops.
If a track is interrupted at the end of the side facing up
Recording and CD pauses.
To record the track again on the opposite side
1. Press [0 DECK], flip the cassette, and insert it.
2. Press [ a/ J ].
The unit records 10 seconds of silence, and resumes recording
from the beginning of the cut-off track.
To record selected tracks
1
\
Program tracks ( page 12).
2
Do steps 2. to 4..
Note
You cannot use ALL-REC with random play and repeat play (
11).
12/13/01, 4:06 PM
\
page
15
RQT6274