Panasonic RX-ES23 Operating Instructions Manual page 5

?
Tape/CD mode select/stop button
(∫ TAPE/CD) ............................................. (l 8, 9, 10, 11)
• Press [∫ TAPE/CD] to stop play.
@
Time adjust, Preset channel select/CD track select dial
(TIME/PRESET TUNE TRACK SKIP
A
Volume control buttons (+, – VOLUME)........ (l 7, 8, 10)
• Press [+, – VOLUME] to adjust to the desired volume
for CD, Tuner or Cassette.
B
Display panel
e.g. CD
Batteries
Insert so the poles (+ and –) match those in the remote
control.
Remove if the remote control is not going to be used for a
long period of time. Store in a cool, dark place.
Replace if the unit does not respond to the remote control
even when held close to the front panel.
Do not
≥ put heavy objects on the remote control.
≥ take the remote control apart.
≥ spill liquids onto the remote control.
)........ (l 7, 8, 9, 11, 12)
Use
≥ Keep the transmission window and the
unit's sensor free from dust.
≥ Operation can be affected by strong light
sources, such as direct sunlight, and the
glass doors of cabinets.
C
CD tray open/close button (< CD) ................... (l 8, 11)
• Press [< CD] to open the tray.
(The unit comes on.)
Load a CD and press [< CD] to close the tray.
D
Standby indicator (Í) (RX-ES29)
When the unit is connected to the AC mains supply, this
indicator lights up in standby mode and goes out when the
unit is turned on.
Standby/on indicator (Í/I) (RX-ES23)
The indicator lights green when the unit is turned on.
When the AC power supply is used, it functions as an AC
connection indicator. (The indicator colour changes to red
when the unit is turned off.)
E
CD tray
F
Remote control signal sensor (SENSOR)
7 m
30° 30°
PHONES PHONES
To Use Headphones (not included)
Reduce volume before connection.
Plug type: 3.5 mm stereo
Note:
≥ Avoid listening for prolonged periods of time to prevent
hearing damage.
5
RQT7914