Warning - Risk of Fire
¯ Washer/Dryer Combo installation must be performed by a qualified installer.
¯ Install the Combo according to the manufacturer's instructions and local codes.
¯ To reduce the risk of severe injury or death, follow all installation instructions.
¯ Save these instructions
Tools and Materials Required
You will need to have the following tools
to help you in the installation of your washer:
¯ Scissors
¯ Tape Measure
¯ Standard Screwdriver
¯ Gloves
¯ Pliers
¯ Level
¯ Wrench
Accessories Supplied
1. Hot & Cold Water Inlet Hoses
Quantity
2
2. Flat Water Inlet Hose Washers
(Installed in each end of water inlet hoses)
3. Use & Care Guide (Not Shown)
4. Plastic Plugs to cover
transportation bolt holes
5. Drain hose support bracket
4
1
3
(~.~ USER MANUAL
8