Advertisement
DVD RECORDER
Watching DVDs
Switch on
Switch off
Operating the DVD recorder
Show disc menus
Show recorder
menus
Start play from a selected item
Switch on the television
and select input
Switch on the recorder
Clear the menus or return to
the previous menu
Select and enter
menu items
Skip items during play
Search through the disc
Start slow-motion play
To view frame-by-frame
and start play
Stop play
Pause play
3
Operating the DVD recorder
Select drive
If it does not change
After performing the following
operations, press this button again.
1. Press [DVD RECORDER].
2. While pressing [ENTER], press and
hold [8] for approximately
2 seconds.
To return
In step 2 above, while pressing [ENTER],
press and hold [9] for approximately
2 seconds.
The factory setting is [9].
When using a Panasonic
DVD recorder
Change the unit's remote control code to
match the remote control code of the DVD
recorder.
Preparations:
Check the remote control
code of the DVD recorder.
For about one second hold down both
[ENTER] and the button ([1], [2] or [3])
which is the same number as the remote
control code set by the DVD recorder.
The factory setting is [1].
Advertisement
