Table of Contents
Advertisement
Problem
Cannot register
handset to base.
If you still have a problem please contact our Customer Care Helpline
(Monday - Friday 9:00am - 5:30pm) on : U.K. 08700 100 076
Technical Information
Specifications:
Standard:
Number of channels:
Frequency range:
Duplex procedure:
Channel spacing:
Bit rate:
Modulation:
RF Transmission Power:
Voice coding:
Operating range:
Power source:
Power consumption, base unit:
Operating conditions:
Dimensions, Base Unit:
Dimensions, Handset:
Telephone line cord length:
AC adaptor cord length:
•
Specifications are subject to change.
•
The illustrations used in this manual may differ slightly from the original device.
Connections:
•
The telephone will not work during a power failure.
We therefore recommend you use a standard telephone and T Adaptor to connect
this Digital Cordless Phone to the line. Your Panasonic Sales Shop can offer you
more information about connection possibilities.
Possible cause
• Max. number of bases
already registered to
handset.
• Max. number of handsets
already registered to base
unit.
• Wrong PIN number
entered (Default 0000).
• Electrical noise in local
area.
Helpline Tel.No. : U.K. 08700 100 076
• Delete unused base
registrations from handset.
• Delete unused handset
registrations from base.
• If PIN number is lost,
contact the Panasonic
Customer Care Helpline.
• Move base / handset away
from sources of electrical
noise ( e.g TV, radio ).
R.O.I. 01289 8333
DECT=(Digital Enhanced Cordless
Telecommunications).
GAP=(Generic Access Profile).
120 Duplex Channels.
1.88 GHz to 1.9 GHz.
TDMA (Time Division Multiple Access).
1728 kHz.
1152 kbit/s.
GFSK.
approx. 250mW.
ADPCM/32kbit/s.
Up to 300m outdoors (line of sight), up to
50 m indoors.
AC Adaptor 220-240 V AC~50/60Hz.
5 VA.
5
o
- 40
o
C, 20 - 80% relative air humidity (dry)
About 103mm x 122mm x 60mm x 180g
About 134mm x 46mm x 30mm x 85g
(without batteries)
About 2.3m
About 1.9m
R.O.I. 01289 8333
Solution
21
Hide quick links:
Advertisement
Table of Contents
