Conference Calls - Panasonic KX-TCD650 Operating Instructions & Quick Manual

Transferring Calls to
Another Handset
The intercom can be used during a
call to transfer an external call
between handsets that are registered
to the same base unit.
For example, when handset 1
transfers a call to Handset 2:
Handset 1 -
During the call, Z
Ï is displayed and the call is put on
hold.
B (desired handset
Z B Z
number).
A ring back tone is heard until
Handset 2 answers.*
Handset 2 (ringing) -
‰ or N N to answer.
Z Z ‰
Handset 1 & Handset 2 -
(Have conversation).
Handset 1 -
± to release the call for
Z ± Z
transfer
OR
N to connect to external
Z N Z
caller again.
To transfer the call directly, without
speaking to the other handset:
Handset 1 -
Z± at *.
Handset 2 -
Z‰.
The transfer is complete.
If the transferred call is not
answered within 30 seconds,
Handset 1 will ring again. Z‰ to
answer the call.
N .
Z N
Helpline Tel.No. : U.K. 08700 100 076

Conference Calls

During a conversation in an external
call, you can make an intercom call
to another handset and then combine
the calls together to establish a
conference call:
Handset 1 -
During the call,Z
B (desired handset
Z B Z
number).
The call is put on hold.
If there is no answer , ZN to
return to the caller.
Handset 2 (ringing) -
‰ or N N to answer.
Z Z ‰
Handset 1 -
C to establish the
Z C Z
conference call.
Handset 1 or Handset 2 -
± to end the conference call.
Z ± Z
R.O.I. 01289 8333
N then
Z N
19