Panasonic NV-FJ762EE Operating Instructions Manual page 37

Audio Dubbing on a Panasonic Hi-Fi VCR
General
≥ The VHS format allows audio dubbing only on the normal (mono) audio track, as the Hi-Fi audio tracks cannot be
re-recorded without erasing the video signal.
A. Audio Dubbing and then Playing Back the Audio-Dubbed Mono Sound Alone
1 Press the INPUT SELECT button
2 Press the Play button to search for the tape position at which the audio dubbing is to start.
3 Press the AUDIO button
≥ The normal audio track is now selected.
4 Press the Pause/Still button
5 Press the A.DUB button
6 Press the Pause/Still button
7 After audio dubbing has been completed, rewind the tape, play it back and make sure that the normal audio track is
selected (see step 3 above).
8 Check if the audio dubbing was performed to your satisfaction.
B. Audio Dubbing and then Playing Back the Audio-Dubbed Mono Sound and Original
Hi-Fi Sound Together (Hi-Fi Mix Function)
1 Press the INPUT SELECT button
2 Press the Play button to search for the tape position at which the audio dubbing is to start.
3 Press the AUDIO button
≥ The Hi-Fi audio tracks are now selected.
4 Press the Pause/Still button
5 Press the A.DUB button
6 Press the Pause/Still button
7 After audio dubbing has been completed, rewind the tape, play it back and set "Audio mode" to "MIX". (For details, refer
to page 53.)
8 Check if the audio dubbing was performed to your satisfaction. The original sound and the new sound are heard
simultaneously (mixed together).
C. Externally Mixing the Sound from the Hi-Fi Tracks with the New Sound for Audio
Dubbing and then Playing It Back
1 Press the INPUT SELECT button
2 Press the Play button to search for the tape position at which the audio dubbing is to start.
3 Press the AUDIO button
4 Press the Pause/Still button
5 Press the A.DUB button
≥ Input both the original signals of the Hi-Fi tracks (from the AV1, AV2 or the Audio Output sockets) and the new sound
into a mixing console (optional), and then input the mixed sound back into the VCR (via the AV1, AV2 or AV3 socket)
for audio dubbing.
6 Press the Pause/Still button
7 After audio dubbing has been completed, rewind the tape, play it back and press the AUDIO button
the "ss" indication appears.
≥ The normal audio track is now selected.
8 Check if the audio dubbing was performed to your satisfaction. The original sound and the new sound are heard
simultaneously (mixed together).
to select the AV input terminal to which the audio dubbing source unit is connected.
repeatedly until the "ss" indication appears.
at this position.
to switch the VCR over to the audio dubbing mode.
to start audio dubbing.
to select the AV input terminal to which the audio dubbing source unit is connected.
repeatedly until the "L R" indication appears.
at this position.
to switch the VCR over to the audio dubbing mode.
to start audio dubbing.
(To produce audio-dubbed tapes for playback on mono VCRs)
to select the AV input terminal to which the audio dubbing source unit is connected.
repeatedly until the "L R" indication appears.
at this position.
to switch the VCR over to the audio dubbing mode.
to start audio dubbing.
repeatedly until
37