Panasonic NV-FJ623 Operating Instructions Manual page 7

Timer Recording with ShowView
Switch on the TV to the video output channel, insert a cassette with an
intact erasure prevention tab into the VCR and set the remote control
to VCR operation.
n Press
n Enter the ShowView number.
For correction use 8 .
n To access [Timer recording], press o .
n If the channel name is not set
automatically, select your Channel [Pos]
:; and store with o .
The name of channel will be saved.
To modify the [Name], see page 10.
n Set the Tape Speed
SP, LP, EP or A (automatic).
n Check the Remaining tape time.
n To store the programme, press o .
&
To preset other recordings
repeat the procedure.
n Press
to switch the VCR
to Standby mode. Make sure that
i
the VCR display appears.
For more information, see page 6.
•
is a trademark of Gemstar Development Corporation. The
system is manufactured under licence from Gemstar Development Corporation.
Recording with Intelligent Timer Function
To set easily the Timer for programmes often broadcasted on the same
channel and time each day (for example series), the Intelligent Timer
Function remembers the channel number along with the start and end times
of the last 8 programmes that you have recorded using Timer Recording.
n Press
n To select the programme :;
n Press
to switch the VCR
to Standby mode for Timer recording.
If you want to modify the data first, follow the next steps.
n If more than 8 programmes are stored, the oldest
data will be lost. To delete recording data manually, press
n To protect a programme press 9 and the lock symbol
To unlock a programme press 8 .
n To modify the data, press o and Timer recording Menu will appear.
n Change the data :;8 9 .
n Press
to switch the VCR
to Standby mode for Timer recording.
For more information, see page 6.
Note:
n These functions can be also
used with the VCR buttons:
n When [Shipping condition], [Auto - Setup Restart] etc. is done,
Intelligent Timer data will be lost.
n To use Intelligent Timer Function, at least one timer recording has to be done.
Recording
(not for NV-FJ623)
Panasonic VCR
=
Show View
8 3 5 4 2 - - - -
Panasonic
Timer recording
Pos Start Stop
Name DATE ON OFF
1. ARD 20/9 15:00 16:00 SP ON
- -/- - - -:- - - -:- - - - - - -
2.- - - - -
- -/- - - -:- - - -:- - - - - - -
3. - - - - -
Panasonic
Timer recording
Pos Start Stop
Name DATE ON OFF
1. - - - - - - - 15:00 16:00 SP
- -/- - - -:- - - -:- - - - - - -
2. - - - - -
- -/- - - -:- - - -:- - - - - - -
3. - - - - -
•
Panasonic
INTELLIGENT TIMER
Pos
Name Date Start Stop
ARD 20/10 15:00 16:00 SP ON
ZDF 21/10 15:00 16:00 SP ON
.
will appear. .
Panasonic
Timer recording
Pos Start Stop
Name DATE ON OFF
1. ZDF 12/11 15:00 16:00 SP ON
- -/- - - -:- - - -:- - - - - - -
2.- - - - -
- -/- - - -:- - - -:- - - - - - -
3. - - - - -
,
To cancel Standby mode for Timer recording,
press and the VCR display
Now you can playback a cassette or make a recording.
After that, you must press the button again to switch
the VCR to the Standby mode for Timer recording.
VCR
1/2
VPS
PDC
To check the Timer recording,
n press
VCR
1/2 n Press
to quit the menu.
VPS
PDC
- - -
To delete or change a Timer recording,
n press
n Use :; to select the entry to be changed.
n Press
to delete the Timer recording.
n Use the relevant function buttons
to change the entries.
n Press o to store these changes.
n Press
to quit the menu.
Programme List
The List of the Timer recordings are stored if:
n the recordings are longer than 15 minutes (EP mode 25 minutes)
n the cassette was not removed of the VCR.
n Press
to display the [Programme List].
VCR
19/10/01
n Select the programme :; .
VPS
PDC
n By pressing the SEARCH Button again, the VCR will wind
the tape to the selected programme and start to playback.
n If you select another programme, press the SEARCH Button again,
the playback will stop and the [Programme List] will appear.
n Press
to quit the menu.
Note:
If you have removed the cassette, or the power supply
was interrupted, the Intro Jet Scan will be activated when pressing
VCR
1/2
the SEARCH Button (see page 8).
VPS
PDC
i
will disappear. .
to display the [Timer recording] menu.
to display the [Timer recording] menu.
Panasonic VCR
Programme List
Pos
Name Date Start
1. *** 01 27/10 17:44
2. *** 01 28/10 15:00
7