Panasonic RX-ED50A Operating Instructions Manual page 15

REW TUNE FF
Number of tracks skipped
Current track
3 2 1
1 2 3 4 5 6 7
Play from this point
Number of times the
button is pressed
1 2 3
Current deck
Cassettes
Tape Program Sensor (TPS)
TPS finds the beginning of a track and resumes play from
there.
During play
Press [ REW–TUNE/
or [ TUNE/ –FF] (forward).
Each press increases the number of tracks skipped (up to 9).
TPS may not operate correctly in the following situations:
•If the interval between tracks is less than 4 seconds.
•If there is noise between tracks.
•If there are silent parts within tracks.
TPS stops if you start play, rewind or fast-forward on the
other deck.
To switch decks
Press [DECK 1/2].
The deck currently selected is displayed.
•The unit automatically selects the deck when a cassette
is loaded.
•Operations on the current deck stop when an operation is
started on the other deck.
Selecting reverse mode
Remote control only
Press [REV MODE].
Each time the button is pressed
: Plays top side to bottom side then stops
: Plays continuously until [
: Plays one side only
To play two cassettes in succession
Press [REV MODE] so "
Press [ ] to start play.
Play continues until [ ] is pressed
You can also press [DECK 1/2] to select the deck to play
first.
] (backward)
] is pressed
" is displayed.
RQT5142
15