Copy Your Tapes (Dubbing) - Panasonic PV-DM2792 Operating Instructions Manual

Copy Your Tapes (Dubbing)

Connections you'll need to make
Playing (Source) VCR
R-AUDIO-L
OUT
MONO
IN
Playback (Source)
1
Insert pre-
recorded tape.
2
3 Press PLAY then
PAUSE at starting
o put in
point t
Standby mode.
(Perform operation of steps 4 and 5 on both units at same time.)
4
Press PLAY
to start dubbing.
5
Press STOP
to stop dubbing.
STOP
Caution
• Unauthorized exchanging and/or
copying of copyrighted recordings
may be copyright infringement.
• Please note that some tapes
cannot be dubbed on this unit.
Also, it is not possible to dub
DVD/Video CD/CD to VHS tape
using this unit.
* Important: If a remote control button does not work
when pressed, press the
the remote and try the button again.
VIDEO
IN FROM
ANT.
OUT TO
TV
Recording (Editing) unit
Select "LINE" mode.
See "Selecting Input Mode" below.
Selecting Input Mode
Method 1:
Press CH . The display will change as follows.
Method 2:
a Press ACTION for MAIN MENU.
b Press to select "TV", then press SET
for SET UP TV screen.
c Press to select "INPUT SELECT," and
then press SET to select "TUNER" or "LINE"
d Press ACTION twice to exit this mode.
button on
Recording (Editing) unit
VIDEO IN L-AUDIO IN-R
Insert blank tape
with record tab.
• Dubbing tapes protected
with Copy Guard will have
poor quality results.
Press REC, then
Press STILL/PAUSE
to put in
immediately
Standby mode.
Press STILL/PAUSE
to start dubbing.
Press STOP
to stop dubbing.
1 2 3
(CABLE) (TV)
LINE 125 or 69
19