Electronic Viewfinder Indications - Quasar Palmcorder VM-D52 Operating Instructions Manual

Electronic Viewfinder Indications

Tape remaining and battery charge level
can be displayed.
2
B
, ,
C D
,
Battery Remaining: Tape Remaining:
FULL
EMPTY
Recording the Date and Time
a
Do steps 1 and 2 above to select time/date,
date only, or no display.
b
Start a recording (page 16).
• Only the Date and/or Time are recorded.
Display-Off Mode
A
Set POWER to CAMERA or VCR.
B
Press MENU for MENU mode.
Press UP or DOWN to select
C
Press DISPLAY to select OFF.
Press MENU to exit.
D
Press DISPLAY repeatedly to remove time/date.
Indications are restored the next time Camcorder is
turned on.
06.VM-D52 Infor p29-34
Before you begin...
• Connect Camcorder to power source.
1
Set POWER to CAMERA.
2
Press DISPLAY
repeatedly to select
the following displays.
1
A
,
FULL
• Tape remaining indicator operates a few
EMPTY
seconds after tape starts moving.
DISPLAY .
[CAMERA MODE]
29
[VCR MODE]
29
02.1.28, 9:57 AM