Camera Recording (Basic, Stand-By, Programmed Recording) - Quasar Palmcorder VM-D52 Operating Instructions Manual

Camera Recording
Recording via EVF
View recording scene on EVF (Electronic
Viewer Finder).
2 VISION
ADJUSTMENT
3
4
16
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
03.VM-D52 Basic p16-18
Before you begin...
• Connect Camcorder to power source.
• Insert cassette with record tab (page 10).
1
Set POWER to
CAMERA.
• Be sure POWER
is fully turned to
CAMERA position.
• EVF turns on/off
Built-in
by the POWER switch.
Microphone
2
Look into EVF and adjust VISION
ADJUSTMENT to your eyesight.
3
Hold down TAPE SPEED for about 1
second to change tape speed to SP/SLP
(page 10).
4
Press RECORD/
1 5
PAUSE to start or
,
pause recording.
5
Set POWER to
OFF when finished.
• To remove the cassette, slide the TAPE
EJECT switch (page 10).
Note:
• When Camcorder is aimed at excessively
bright objects, or bright lights, a vertical bar
may appear in the picture. This is normal for
the CCD pick-up. Try to avoid this when
possible.
16
EVF Indication
(Record/Pause mode)
Tape speed
EVF Indication
(Record mode)
02.1.28, 9:56 AM