Table of Contents
Advertisement
9. Programmable Features
9.2 Basic features
Feature/Code
Setting the date and time
{#}{1}{0}{1}
Setting your logo
{#}{1}{0}{2}
Setting your fax number
{#}{1}{0}{3}
Setting the dialling mode
{#}{1}{2}{0}
Setting recall/flash time
{#}{1}{2}{1}
Changing the LCD display
contrast
{#}{1}{4}{5}
Changing the password for
feature programming via
remote operation
{#}{1}{5}{5}
Setting the ringer pattern
{#}{1}{6}{1}
58
Selection
Enter the date and time using the dial keypad. See page 24 for details.
Enter your logo using the dial keypad. See page 25 for details.
Enter your fax number using the dial keypad. See page 25 for details.
{1} "PULSE"
{2} "TONE" (default)
See page 21 for details.
The recall/flash time depends on your telephone exchange or host PBX.
{0} "900ms"
{1} "700ms" (default)
{2} "600ms"
{3} "400ms"
{4} "300ms"
{5} "250ms"
{6} "200ms"
{7} "160ms"
{8} "110ms"
{9} "100ms"
{*} "90ms"
{#} "80ms"
Note:
L If the unit is connected via a PBX, PBX functions (transferring a call, etc.)
might not work correctly. Consult your PBX supplier for the correct setting.
{1} "NORMAL" (default)
{2} "DARKER"
1. {MENU} i {#}{1}{5}{5} i {SET}
2. Enter the current password. i {SET}
L The default password is "1234".
3. Enter a new 4-digit password using 0–9. i {SET}
4. Enter the new password again. i {SET} i {MENU}
Note:
L If you forget your current password, "0101" can always be entered in step
2 to continue changing the password.
L This password is also used for feature programming via web browser.
{1} "A" (default)
{2} "B"
{3} "C"
Advertisement
Table of Contents
