Panasonic Viera TX-LF32G20S Operating Instructions Manual page 41

Set timer programming event details
Start making the settings
Select the function (Ext Rec., USB HDD Rec. or Reminder)
Ext Rec. /
USB HDD Rec.
select
Reminder
Set the channel, date and time (repeat the operations as below)
Set items in the order of
select
the item
Displayed if the timer programming events are overlapped
Timer Programming USB HDD Remaining Capacity 500GB (50%)
F unctio n No. Cha n n e l Na me
Reminder D 7 BBC7
<TI M ER>
Ext Rec. D 1 BBC1
<TI MER>
Ext Rec. C 3 I T V 1
<TI MER>
- - - - - -
Channel number
C: DVB-C
D: DVB-T
You cannot change the
mode within the menu.
Store
To change a timer programming event
Select the programme to be changed
To cancel a timer programming event
Select the programme to be deleted
To record with subtitles (if available)
Select the programme to record with subtitles
To cancel a timer programming event temporarily
Select the programme to be cancelled
Check that the LED is orange. If not, timer programmes are not active or not stored.
Timer Programming reminder messages will remain displayed until one of the following occurs:
• You press the OK button to view the programme or the EXIT button to cancel the reminder.
• The timer programming event that the reminder is set for ends.
"!" identifies that any timer programming events have overlapped. "Ext Rec." and "USB HDD Rec." are given
priority over "Reminder". As for the overlapped two or more "Ext Rec." / "USB HDD Rec.", the first timer
programming event starts and finishes as programmed. The next timer programming event can then start.
The recording of Timer Programming will automatically change to the programmed channel 10 seconds before
the start time.
To stop recording the timer programming event directly prior to the start time, it may be necessary to stop the
recorder manually.
The recording of Timer Programming will be performed even if the TV is in REW LIVE TV recording (p. 53) and
Pause Live TV recording (p. 77). In this case, these recordings will be cancelled.
Timer Programming
: to record the programme to the external recorder (Ext Rec.) or the
USB HDD (USB HDD Rec.)
When the start time comes, the channel will be switched automatically
and the video and audio signals will be output. 2 mins. before the
starting time, a reminder message appears if you are watching TV.
: to remind watching the programme
When you are watching TV, a reminder message appears 2 mins.
before the start time.
Press the OK button to switch to the programmed channel.
to .
,
entered with numeric buttons.
set
Wed 28.10.2009 10:46
Date Start End
Wed 28.10.2009 17:00 18:30
(9 0 min .)
STTL Wed 28.10.2009 18:00 20:00
(120 min.)
Thu 29.10.2009 21:30 22:30
(60 min.)
--/-- --:-- --:--
( i )
Date
one day ahead
daily or weekly
(press repeatedly)
access
select
red
blue
and can also be
Information of the USB HDD (if available)
Records with subtitles (if available)
To indicate this
yellow
Duration (automatic display)
Ending time
Starting time
Daily Sun-Sat: Sunday to Saturday
Daily Mon-Sat: Monday to Saturday
Daily Mon-Fri: Monday to Friday
Weekly Sat/Fri/Thu/Wed/Tue/Mon/Sun:
Same time on the same day every week
Correct as necessary
(as above)
Each time pressed:
auto
yellow
Each time pressed:
cancel
( press again to
remove subtitles)
off
stop cancelling
41