Panasonic Viera TX-LF32G20S Operating Instructions Manual page 13

Select "Start Auto Setup"
5
TV Signal Selection
DVB-C
DVB-T
D
DVB-T support for HD services
D
HD
Analogue
A
Start Auto Setup
Auto Setup starts
Auto Setup will start to search for TV channels and store them.
The stored channels and sorted channel order vary depending on the country, area, broadcasting
system and conditions of signal reception.
Auto Setup varies depending on the country you select.
DVB-C Network Settings
Enter the Home Frequency and Network ID specified by your cable provider.
And then, select "Start Auto Setup".
DVB-C Network Settings
Frequency
Network ID
Start Auto Setup
DVB-C Auto Setup
DVB-C Auto Setup
Progress
This will take about 3 minutes.
No. Channel Name
1 CBBC Channel
2 BBC Radio Wales
3 E4
Free TV: 3 Pay TV: 0
Searching
DVB-T Auto Setup
DVB-T Auto Setup
Progress CH 5
This will take about 3 minutes.
CH Channel Name
62 CBBC Channel
62 BBC Radio Wales
62 E4
62 Cartoon Nwk
Free TV: 4 Pay TV: 0
Searching
Analogue Auto Setup
Analogue Auto Setup
Scan CH 2
This will take about 3 minutes.
CH Channel Name
CH 29
CH 33 BBC1
Analogue: 2
Searching
Sending Preset Data
Please wait!
0%
Remote control unavailable
enter the frequency and network ID
362 MHz
41001
0% 100%
Type Quality
Free TV 10
Free TV 10
Free TV 10
Radio: 0
Depending on the country you select, the channel selection screen
69
will be displayed after DVB-T Auto Setup if multiple channels have the
Type Quality
same logical channel number. Select your preferred channel or exit the
Free TV 10
Free TV 10
Free TV 10
screen for automatic selections.
Free TV 10
Radio: 0
78 CC 1 41
If Q-Link, VIERA Link or similar technology (p. 74 and p. 75)
compatible recorder is connected, channel, language, country / region
100%
settings are automatically downloaded to the recorder.
If downloading has failed, you can download later by the menu item.
"Download" (p. 30)
access
select
Depending on the country you select, "Auto" is
displayed and you do not have to enter them.
In this case, Home Frequency and Network ID will
be set automatically.
access
select "Start Auto Setup"
(continued to the next page)
13