L Make sure the blue gear (1) and white
gear (4) are installed as shown.
1
2
5
Turn the blue gear (1) in the direction of the
arrow until the ink film is tight (2).
1
4
3
2
1. Introduction and Installation
L Make sure that the ink film is wrapped
around the blue core (3) at least once.
Correct
3
Incorrect
The ink film is not wrapped around the
blue core.
Slack/Crease
6
Close the back cover securely by pushing
down on the notched area at both ends (1).
7
Close the front cover securely.
1 turn
Tight
Reverse
1
13