Using The 3D Eyewear - Panasonic TY-EW3D10E Operating Instructions Manual

Using the 3D Eyewear

„ Using the television menu controls, set so that 3D images are
„
shown.
1. (When 3D image signals are being received) press the MENU button on
the television remote control.
2. Select "Setup", and press the OK button.
3. Select "3D settings", and press the OK button.
4. Select "3D Picture Display", and use
The procedure above is only an example. For details, see the television operating
instructions.
„ Wearing the 3D Eyewear
„
1. Press and hold the power button on the 3D Eyewear for approximately
1 second. (The indicator lamp lights for approximately 2 seconds.)
2. Put on the 3D Eyewear.
If the 3D Eyewear slips out of place, hold it in place using the specialised band, and
adjust the length of the band. (
If the 3D images are not displayed correctly, adjust the 3D image-related settings.
For details, see the television operating instructions.
* The perceived three dimensional effects of the 3D Eyewear differ from person to
person.
„ After Use
„
Press and hold the power button on the 3D Eyewear for approximately 1 second.
(The indicator lamp on the 3D Eyewear flashes 3 times, then the power switches off.)
After using the 3D Eyewear, store it in the case provided.
8 - ENGLISH
to select "3D" or "2D".
page 7)