It is possible to enter babies' and pets' names and the locations when
recording. When a screen that looks like the one on the right is displayed,
you can enter characters. (Only alphabetical characters and symbols can
Press 3/4/2/1 to select text and then press [MENU/SET] to register.
Move the cursor to [
(lower case),  (numbers) and [&] (special characters).
To continuously enter the same character, move the cursor by pressing [T] on the zoom
The following operations can be performed by moving the cursor to the item and pressing
The following characters and numbers can be entered.
A maximum of 30 characters can be entered (Maximum of 9 characters when setting
names in [Face Recog.]).
A maximum of 15 characters can be entered for [
of 6 characters when setting names in [Face Recog.]).
Press 3/4/2/1 to move the cursor to [Set] and then press [MENU/SET]
to end text input.
Text can be scrolled if all of the entered text does not fit on the screen.
It is displayed in order of location, [Name] ([Baby1]/[Baby2], [Pet]), [Name] ([Face Recog.]).
] and then press [MENU/SET] to switch text between [A] (capitals), [a]
Enter a blank
Delete a character
Move the entry position cursor to the left
Move the entry position cursor to the right
], [ ], [ ], [ ] and [ ] (Maximum
- 77 -