Table of Contents
Advertisement
≥Alternatively, you can set the category on
the Navigator list. (See page 35 for details.)
≥This function is activated when JET
NAVIGATOR is set to ON. (See page 22.)
When JET NAVIGATOR is set to OFF,
proceed to the step 8.
7 Press MENU to make
the previous display
appear.
8 To activate timer
recording, press TIMER Á.
≥When JET NAVIGATOR is set to ON, the
[PROGRAM IS COMPLETED REMAINING
PROGRAM 49] message appears.
(See page 22.)
≥When JET NAVIGATOR is set to OFF, the
[PROGRAM IS COMPLETED] message
appears. (See page 22.)
≥The VCR will be set to the timer recording
standby mode after about 1 minute if
TIMER Á is not pressed.
Weekly Timer Recording
In step 3, select the desired day by pressing
DATE s.
For example, SU (Sunday)
(SUuSunday, MOuMonday, TUuTuesday,
WEuWednesday, THuThursday, FRuFriday,
SAuSaturday)
Daily Timer Recording
For this timer function, several groups of days
can be selected.
A Daily recording from Monday to Friday
(MO–FR)
B Daily recording from Monday to Saturday
(MO–SA)
C Daily recording from Sunday to Saturday
(SU–SA)
32
On Screen Display
CH DATE ON
OFF
2
27SA
2 0 : 0 2 2 1 : 3 0
SP
: PROG./CHECK
CHECK
CH DATE ON
OFF
2
SU
– – : – – – – : – –
SP
CATEGORY
:
1
In step 3, select the desired days by pressing
DATE s.
For example, C
Timer Recording from an
External Signal Source
If timer recording is performed by a unit
connected to the audio/video input sockets,
select the AV input indicator in step 2 for the
program position.
Setting other Programs in
Succession
Repeat steps 1–8.
Selecting the Desired Tape
Speed
Press SPEED to make the selection in any of
steps 1–5.
Programming a Timer
Recording of a TV Program Until
its End (Tape Speed Auto
Change Function )
If the VCR determines that the remaining tape
time is insufficient to record the program to its
end, this function automatically changes the
tape speed to ensure that the whole program
will be recorded.
The tape speed will change as follows:
NTSC system: SP>EP
PAL system:
SP>LP
≥This function cannot change the recording
speed to the EP mode for PAL system.
If the remaining tape time is still not sufficient
even in the LP or EP mode, the programme
cannot be recorded to its end.
CH DATE ON
OFF
2
SU-SA
– – : – – – – : – –
SP
CATEGORY
:
1
CH DATE ON
OFF
A2
– – – –
– – : – – – – : – –
SP
CATEGORY
:
1
CH DATE ON
OFF
2
27SA
2 0 : 0 2 2 1 : 3 0
EP
CATEGORY :
1
Advertisement
Table of Contents
