Resume Function; Auto-Power Off Function; Still (Pause) Picture; Frame By Frame Picture - Panasonic V-DF2702-K Operating Instructions Manual

* Important: I f a remote control button does not work when pressed, press the DVD button on the remote
and try the button again.
I
Forward/Reverse rapid scene
search
➛ ➛ ➛ ➛ ➛ Press FF/SLOW+ or REW/SLOW-
during play.
➛ ➛ ➛ ➛ ➛ Press PLAY to release.
• Starting forward/reverse search during play
started from menu on Video CDs may recall
menu.
• Search speed, slow at first, increases with
each additional press of the button up to 5
levels.
I Forward/Reverse Chapter/Track
Skip
➛ ➛ ➛ ➛ ➛ Press SKIP
| or |
Each press skips a chapter (DVD) or
track (Video CD/CD).
|
Pressing SKIP once midway through a
chapter/track returns to start of that chapter/track.
Each additional press skips back one chapter/
track.
| |
• Pressing SKIP or
from menu on Video CDs may recall menu.
Current playback position
Chapter/Track Chapter/Track Chapter/Track
Reverse Skip
I Still (Pause) Picture
➛ ➛ ➛ ➛ ➛ Press STILL/PAUSE during play.
➛ ➛ ➛ ➛ ➛ Press PLAY to release.
• DVD/Video CD : The unit will enter Still picture mode.
• CD : The unit will enter Pause mode.
I Frame by Frame picture

(DVD/Video CD)

➛ ➛ ➛ ➛ ➛ Press STILL/PAUSE in Still mode.
➛ ➛ ➛ ➛ ➛ Press PLAY to release.
• Each press advances picture one frame.
• Hold down for consecutive frame advance.
• Whether pictures are advanced by "FRAME" or
"FIELD" is selected automatically (see page 62).
I Slow Motion picture (DVD/Video CD)
➛ ➛ ➛ ➛ ➛ Press FF/SLOW+ or REW/SLOW-
(DVD only) in Still mode.
➛ ➛ ➛ ➛ ➛ Press PLAY to release.
• Slow motion speed, slow at first, is increased
with each additional press of the button up to 5
levels.
• Reverse slow motion is not available for video
CDs.
DF2702-K(P20-21 Basic DVD).p65
• When
is being operated, it means that the
corresponding operation is prohibited by the
unit or the disc.

RESUME function

The unit memorizes the point where STOP
is pressed (
Press PLAY to resume play from this point.
Pressing STOP again or opening the tray
cancels RESUME, however, RESUME is not
cancelled when power is turned off and on.
• RESUME works only with discs for which
during play.
elapsed play time is displayed during play.

Auto-Power Off function

Power turns off after unit has been in Stop
mode (DVD) for about 5 minutes.
during play started
Enjoy Video CDs featuring
Chapter/Track
playback control without
Forward Skip using menus (Video CDs only)
1. Do steps 1-4 (previous page).
When menu appears, press STOP.
2. Press number key(s) to select desired
track (play begins).
• Check disc for track numbers.
• Press "1" to start at beginning of disc.
To Resume Menu use,
Press STOP, and press PLAY, then the menu
appears. Now, go to step 5 (previous page).
Notes
• Please read the disc jacket for operation
information.
• If a single sided disc is placed in upside down,
"PLEASE CHECK THE DISC,
AND FOR STAINS OR SCRATCHES ON
DISC" is displayed.
• Remove disc and press unit POWER off when
not in use.
• Disc continues to rotate with menu displayed
even after play is done. Press STOP to clear
menu display when finished with menu.
21
appears on the screen while a button
flashes on screen).
2002/03/08, 18:28
21