Identifying Controls - Panasonic Viera TH-42PY70F Operating Instructions Manual

Installation of the pedestal
■
Attaching the bands for fixing cables
E
Preventing the TV from falling over
The TV could fall over during an earthquake, etc.
• We recommend that measures are taken to prevent the TV from falling over in such an event.
The information in this section is designed to reduce the risk of injuries caused by the TV falling over during an
earthquake, etc.
• However, no measure can guarantee protection against all earthquakes.
The precautions in this section are recommendations for providing more secure installation of your TV if you live
in an earthquake prone area.
Band (2) Screw (2)
Nominal diameter 4 mm × 12
■
Securing to a base
Fix pedestal and base together with band.
■
Securing to a wall
Fix to wall or post with strong commercial wire or chain.
Remove the screws at both top corners on the
rear of the TV, and attach the clamps
TV using the removed screws.
8
Insert the spigot on the two To tighten:
bands into the pedestal.
To loosen:
Keep the knob
pressed
Wood screw (2) Clamp (2)
Remove
4
Attach
to the

Identifying Controls

F
AV3
S-V
V
L
R
Mains power
On / Off switch
Remote control
signal receiver
Power LED C.A.T.S.
•
(Contrast Automatic Tracking System) sensor
Standby: red
On: green
( senses brightness to adjust picture quality in
"Auto" Mode in Picture Menu) (p. 22)
Standby On / Off switch
(Switches TV On or Off standby)
Surround
(p. 22)
Access VIERA Link Menu (p. 35)
ASPECT
Changes aspect ratio
(p. 15)
OK button to confi rm selections and choices
Press after selecting programme positions to
quickly change programme.
Main Menu
Press to access VIERA Link, Picture,
Sound and Setup menus (p. 20)
Teletext
(p. 18)
Viewing a favourite teletext channel
(p. 19)
Programme / channel change buttons (0-9)
and Teletext page buttons.
(p. 14 and p. 18)
When in Standby mode, switches TV On.
Programme Information
(p. 15)
Selects programmes in sequence
VCR / DVD operations
(p. 17)
Function select
•
Volume / Contrast / Brightness / Colour /
Sharpness / Tint (NTSC mode) / Bass /
Treble / Balance / Auto Setup (p. 24)
Increases or decreases the
programme position by one. When a
Swing door
function is already displayed, press
to open
to increase or decrease the selected
function. When in Standby mode,
switches TV On.
Changes the input mode
Headphones jack (p. 36)
AV3 terminals
(p. 36)
SD CARD slot (p. 31)
Changes the input mode
TV - changes TV mode
(p. 16)
AV - changes AV input mode
INPUT
Viewing SD Card (p. 30)
OPTION SD CARD
Option menu
EXIT
Sets the preferred settings of viewing
and sound options easily (p. 15)
EXIT (Returns to TV screen)
Cursor buttons to make selections and
RETURN
adjustments
Returns to the previous menu
F.P.
Coloured buttons used for the
selection, navigation and operation of
various functions
Still picture
(p. 15)
Teletext Hold (p. 19)
Teletext Index
(p. 19)
Sound mute On / Off
Volume
DIRECT TV REC
DIRECT TV Recording
To immediately record programme in VCR /
DVD recorder with Q-Link connection
(p. 32)
(p. 16)
9