Viewing From Sd Card (Photos) - Panasonic Viera TH-42PY70F Operating Instructions Manual

Viewing from SD Card
The still images recorded by the digital camera will be displayed.
1
2
INPUT
OPTION SD CARD
EXIT
3
RETURN
Selected
photo
4
Operation
guide
TV
Caution
•
■
During the operation, no signals are output from the monitor output terminals.
To return to TV •
"Date" shows the date on which the recording was made by the digital camera. It
EXIT
SD CARD
shows "**/**/****" when recordings are made without date signal.
or
Cautions in handling SD Card
•
Do not remove the card while the TV is accessing data (this can damage card or TV).
•
Do not touch the pins on the back of the card.
•
Do not subject the card to a high pressure or impact.
•
Insert the card in the correct direction (otherwise, card may be damaged).
•
Electrical interference, static electricity, or erroneous operation may damage the data or card.
•
Back up the recorded data at regular intervals in case of deteriorated or damaged data or erratic operation of the
30
TV. (Panasonic is not liable for any deterioration or damage of recorded data.)
Insert the SD Card
•
Warning message for output signal is displayed.
Enter SD mode (Photo View Mode)
Select the photo to be viewed
Error display
(images that could not be loaded, etc.)
Photo View Mode
1/17
Filename
100-0001 100-0002 100-0003 100-0004
100-0001
Date
■
23/10/2006
Pixel
1600 x 1200
100-0005 100-0006 100-0007 100-0008
Reading
Select
EXIT
Select
100-0009 100-0010 100-0011 100-0012
RETURN
View
Slide show
Selected photo (Thumbnail screen)
information is displayed
View
■ OPTION
To display the operation guide or
To previous photo
Rotate 90˚ (anti-clockwise)
To next photo
View
Rotate
EXIT
Select Rotate 90˚
List
(clockwise)
Rotate
•
To return to thumbnail screen
Slide show
RETURN
Displayed one at a time
(Photos)
•
■
SD
Card
■
Start Slide show (operate in step
select
Select the photo for the fi rst view
view
Slide show
•
■
red
Slide show settings (operate in step
For details,
see p. 31 Display the
menu
Menu Item
Interval
Repeat
Is SD Card in?
No valid fi le to play
Cannot read fi le
For details on SD Cards (p. 39)
To insert
Label surface
Push until a click is heard
Slide show
)
or
Start Slide show
red
)
or
Select "Viewing Setup" Select the functions and set
access
Main Menu
Viewing Setup
Picture
Interval
Viewing Setup select Repeat
•
"Picture Menu" (p. 22)
Adjustments / Confi gurations (alternatives)
Select slide show interval (5 / 10 / 15 / 30 / 60 / 90 / 120 seconds)
Slide show repeat (Off / On)
On screen messages
Message
•
Insert a SD card.
•
The card has no data.
•
The fi le is broken or unreadable.
•
The TV does not support the format.
(For the applicable formats and data, see p. 39.)
■
To remove
Press the centre of the card
•
To pause
set
5 seconds
Off select
Meaning / Action
31