Panasonic KX-TCD210G Operating Instructions Manual page 33

TCD210G(e-g).book Page 33 Friday, January 14, 2005 1:42 PM
Hinweis:
L To receive SMS messages using a mailbox,
inform others of your mailbox number.
Changing private mailbox settings
You can change the password or name of the
private mailbox and erase the mailbox.
1
Press {j/OK}.
2
Select "SMS", then press {>}.
3
Select "Allgemein", then press {>}.
4
Select "Einstellungen", then press {>}.
5
Enter "0000" (default base unit PIN).
L If you changed the PIN, enter it (Seite 26).
6
Select "Private Mailbox", then press
{>}.
7
Select the desired mailbox name, then press
{>} 2 times.
8
Enter the mailbox's 4-digit password.
9
Edit the mailbox name (5 characters max.,
Seite 34), then press {j/OK}.
L To erase the mailbox, press and hold
{C/T}, press {j/OK}, select "Ja", press
{>}, then press {ih} to finish.
10
Enter a 4-digit password for the mailbox, then
press {j/OK}.
11
Select "Speichern", then press {>}.
12
Press {ih}.
Hinweis:
L If you change the name of a mailbox which has
messages in the receive list, the messages will
remain in the receive list under the new
mailbox name.
L If you erase a mailbox, its messages will also
be erased.
Storing the PBX line access number
(for PBX users only)
Store your PBX line access number (4 digits
max.) so that SMS messages are sent properly.
When sending SMS messages to entries in the
phonebook or redial list, the PBX line access
number will be deleted.
1
Press {j/OK}.
2
Select "SMS", then press {>}.
3
Select "Allgemein", then press {>}.
SMS (Short Message Service)
4
Select "Einstellungen", then press {>}.
5
Enter "0000" (default base unit PIN).
L If you changed the PIN, enter it (Seite 26).
6
Select "TK-Anlagen-Nr.", then press
{>}.
7
Select "Ein", then press {>}.
8
Enter your PBX line access code and a
dialling pause, if necessary, then press
{j/OK}.
9
Select "Speichern", then press {>}.
10
Press {ih}.
33