Table of Contents
Advertisement
Specifications
GENERAL
Power consumption:
Power consumption in standby mode:
Power supply:
Dimensions (WkHkD):
(Without wall mount bracket)
(With wall mount bracket)
Mass:
(Without wall mount bracket)
(With wall mount bracket)
Operating temperature range:
Operating humidity range:
20 % to 80 % RH (no condensation)
AMPLIFIER SECTION
RMS Output Power
Front ch:
30 W per channel (4 ≠), 1 kHz, 10 % THD
Subwoofer ch:
30 W per channel (4 ≠), 100 Hz, 10 % THD
Total RMS Dolby Digital mode power:
30 W
Approx. 0.2 W
AC 220 V to 240 V, 50 Hz
800 mmk108 mmk58 mm
800 mmk108 mmk80 mm
Approx. 3.2 kg
Approx. 3.3 kg
0
C to r40
o
120 W
SPEAKER SECTION
FRONT SPEAKERS (BUILT-IN)
Type: 1 way, 1 speaker system (Bass Reflex)
Full range:
SUBWOOFER (BUILT-IN)
Type: 1 way, 1 speaker system (Bass Reflex)k2
Woofer:
TERMINAL SECTION
HDMI
This unit supports "HDAVI Control 5" function.
HDMI input
Input connector:
HDMI AV output
Output connector:
Digital Audio Input (TV only)
Optical digital input:
Sampling frequency:
C
o
Audio Format:
IR Blaster
Terminal 1:
1 Specifications are subject to change without notice.
Mass and dimensions are approximate.
2 Total harmonic distortion is measured by a digital
spectrum analyzer.
Audio information
∫ Compatible audio formats
This unit is compatible with the following
formats:
Dolby Digital, DTS Digital Surround,
2-channel LPCM and multi-channel LPCM.
≥ When using the optical digital audio cable, this
system is not able to play audio with a
sampling frequency greater than 48 kHz.
(Sound Effect and Dolby Virtual Speaker will
be automatically cancelled if the audio signal's
sampling frequency is greater than 48 kHz.)
6.5 cm Cone typek2
8 cm Cone typek2
Type A (19 pin)
Type A (19 pin)
Optical terminal
32 kHz, 44.1 kHz, 48 kHz
LPCM, Dolby Digital
3.5 mm jack
15
Hide quick links:
Advertisement
Table of Contents
