Maintenance - Panasonic SC-AKX50 Operating Instructions Manual

■ USB
The USB drive or its
contents cannot be
read.
Slow operation of the
USB device.
■ Unit displays
"NO PLAY"
"F61"
"ERROR"
"ERROR" (during
recording)
"PLAYERROR"
"VBR–"
"HI-SPEED CAN'T REC"
"DEVICE FULL"
System memory reset (Initialisation)
When the following situations occur, refer to the instructions below to reset the memory:
There is no response when buttons are pressed.
•
You want to clear and reset the memory contents.
•
To reset system memory
1 Disconnect the AC mains lead. (Wait at least 3 minutes before proceeding to step 2.)
2 While pressing and holding down [1] on the main unit, reconnect the AC mains lead.
"– – – – – – – –" appears on the display panel.
3 Release [1].
All the settings are returned to the factory preset.
You will need to reset the memory items.

Maintenance

If the surfaces are dirty
To clean this unit, wipe with a soft, dry cloth.
Never use alcohol, paint thinner or benzine to clean this unit.
•
Before using chemically treated cloth, read the instructions that came with the cloth carefully.
•
26
RQT804
The USB drive format or its contents is/are not compatible with the
•
system.
The USB host function of this product may not work with some USB
•
devices.
USB devices with storage capacity of more than 32 gigabytes may not
•
work in some instances.
Large fi le size or high memory USB fl ash drive takes longer time to
•
read.
Check the content.
•
Only MP3 format fi les can be played.
•
Check and correct the speaker cords connection.
•
If this does not fi x the problem, consult the dealer.
Disconnect the USB device. Turn the unit off and then turn back on.
•
Incorrect operation performed. Read the instructions and try again.
•
You are not able to select other playback source (example: radio, USB
•
and etc.) or press [2/3] or [5/6] during recording.
Stop the recording function.
You are not able to open the disc tray when recording from AM source.
•
Select a suitable recording mode (128 KBPS or 192 KBPS) and resume
•
recording.
An unsupported MP3 format is being played. The unit will skip that track
•
and play the next one.
The unit cannot display the remaining play time for variable bit rate
•
(VBR) tracks.
You cannot use high-speed recording while using analogue mode.
•
Change to digital mode or use normal recording.
You cannot perform recording because the total USB remaining REC
•
(recording) time of the USB device is less than the total time of the
music source.
Change to a USB device which has the appropriate recording time and
perform the recording again.
Page
20
—
—
—
—
—
7
—
—
16
—
19
—
—
19
15