Usb And Internal Memory - Panasonic SC-AKX50 Operating Instructions Manual

USB and internal memory

The USB connectivity enables you to record sound or
music tracks from various sources to MP3 format and
store into the USB mass storage device which can be
played back. Typically, USB memory devices (bulk
only transfer).
The 2 GB internal memory of this unit also allows you
to store recorded sound or music tracks from various
sources to MP3 format which can also be played
back when desired.
You can play or record up to 800 folders (maximum
999 tracks in an album) or a total of 8000 tracks,
depending on the available storage capacity.
Connecting a USB mass storage
device
Preparation
Before connecting any USB mass storage device to
the unit, ensure that the data stored therein has been
backed up.
It is not recommended to use a USB extension cable.
The USB device connected via the cable will not be
recognized by this unit.
MEMORY
4/9
USB
USB enabled
4/9
device
(not included)
MUSIC PORT
Reduce the volume and connect the USB
mass storage device to the USB port.
Note:
When you connect your digital audio player to the
USB port, it charges all the time except in standby
mode.
Checking the USB and internal memory
status
You can check available storage space in the USB
device or internal memory.
1
Press [4/9, USB] or [4/9, MEMORY]
and then [8] (stop).
2
Press [DISPLAY] repeatedly in the stop
mode.
Original
display
Example of USB remaining recording time:
Shows the time is 10
minutes and 15 seconds
Original
CD
TRACK
display ]
4/9
FM/AM
Example:
x OPEN/CLOSE
MIC VOL
MIN MAX
MIC
Note:
The memory's remaining recording time will also
have similar display as USB.
Memory available
USB remaining
]
]
storage space
recording time
Shows the time 20
hours and 15 minutes
Memory remaining
USB available
]
recording time
storage space
15